New Products
Showing 49–60 of 96 results
Sale!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Original price was: $250.00.$239.00Current price is: $239.00.
Read more
Headlight (Complete) Mounting Kit w/ T-3 Bulbs
Headlight Mounting Kit with T3 Bulbs
48 Pc Kit provides T3 Headlights & all the Fasteners needed to mount your Headlights and Headlight Bezels Fits 1970 – 1972 Skylark, GS & GSX Source – Stage 1 Restoration (You won't find this kit anywhere else!)These are currently on Back Order
This Kit Provides the following parts:- 4 Pack of T3 Headlights (Made in the USA)
- 4) Headlight Trim Rings
- 8) Headlight Adjusters
- 4) Headlight Bucket Springs
- 8) Headlight Bezel Nuts
- 8) Headlight Bezel Screws
- 12) Headlight Mounting Screws
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Adjustment Screws – 8 Pc Kit
Headlight Adjustment Screws
These snap into the Core Support and hold the headlight Buckets in place. 8 Pack for $24.00 - Black in color Fits 1970 – 1972 Skylark, GS & GSXThese are currently on Back Order!
Note: These can be tricky to install. We recommend installation by someone that is familiar with these! See photos below to see how we install them . . . Photo below shows the Adjuster in place. Notice the Tab (Circled in Yellow) that needs to be installed on the backside of the Sheet Metal.
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Hood Adjustment Bumper Kit
10 Pc Hood Adjustment/Bumper Kit
Kit Includes the following:
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key words . . . Hood Bumpers, Hood Adjusters
.
- 3) Front Adjustment Bumpers
- 3) Front Adjustment Retainer Nuts
- 2) Rear Adjustment Bumpers
- 2) Rear Adjustment Nuts
- These are the CORRECT from Bumpers!!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key words . . . Hood Bumpers, Hood Adjusters
. 
Hood Hinges
1970 - 1972 Hood Hinges (New!)
Replace your Bent or Loose Factory Hinges These come in a "Black" EDP coating for protection. They should be Phosphate Plated if you want them to pass "Concours" judging These fit the 1970, 71 & 72 Skylark, GS, GSX & Sportwagons. Need the correct mounting bolts? Click Here . .
Hood Tach Harness Clip
Hood Tach Wire Harness Clip
Clip used to attach the Hood Tach Harness to the Hood
.
. 
Hood Tach Mounting Nuts
Factory Hood Tach Flange Nuts (Phosphate)
These are the correct Phosphate Flange Nuts that Buick used on there Hood Tach's
Fits 1970 - 1972 Factory Hood Tach's
Note: These will not work on the current Aftermarket Hood Tach's.
Hood Tach Repair Harness
Hood Tach Repair Harness
Use this harness to repair or freshen up your GSX Hood Tach Harness.
This is a 36" section of Factory Wiring that you can splice in to repair or freshen up your existing harness.
Also included is a 20" section that is used along with the Ignition Coil Wire. (includes the Factory Weather Proof Junction Plug)
This will also work well for someone using an Aftermarket Hood Tach that wants the correct colored wires.
The 3 wires are as follows:
- Black - Ground
- Grey - Tach Lights
- Brown - Signal Wire (To Coil)
Horn Mounting Bolts
Horn Mounting Kit
Kit Includes:- 2) Zinc Plated Bolts with Built in Star Washers
- 2) Square Nuts to weld on Back Side of Horn Brackets
- Enough to do BOTH Horns!
We weld the Nuts on the back side of the horns as shown in the photo. That allows us to use a Standard thread Zinc Bolt with built in Star Washer. When done and mounted it looks like the factory bolts and provides a better ground!
License Plate Bracket Rubber Bumpers (1970)
Reproduction Rubber Bumper for License Plate Brackets
Fits 1970 Style Bumpers for the License Plate Bracket (or anything with a 3/8″ hole)
$5.00 is for the PAIR
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Mirror Map Light Replacement Bulb
Rear View Mirror "Map Light" Replacement Bulb
Made by Sylvania This is the correct replacement bulb for cars equipped with a factory Map Light .
Motor Mount Bolt Kit – 350
350 Motor Mount & Frame Pad Bolt Kit
Fits 1968 – 1972 350 Engines Best Bolt Kits on the Market will be found here at Stage 1 Restoration! Kit includes the following:- 4) Motor Mount to the Engine Block Bolts
- 6) Motor Mount to the Frame Bolts & Nuts
- 2) Motor to the Chassis Bolts & Nuts
- 2) Washers for Passenger Side Frame Mount
Motor Mount Swap Kit (350 to 455)
350 to 455 Motor Mount Swap Kit
Kit Provides the following:- American Made 400/455 Engine Mounts
- American Made 400/455 Frame Pads
- Correct GM Hardware needed for each