Bumper Related Items
Showing 1–12 of 35 results
“BUICK” Rear Bumper Emblem – 1970
Reproduction "BUICK" Rear Bumper Emblem - 1970
Note: We've installed enough of these that we feel the mold for these doesn't allow the Emblem to fit 100% flat on the Bumper as it should. With that being said if you go through with the purchase of this item be aware that you will have to "Draw in the Ends" as its being tightened. This is a pretty minor issue but we like to let our customers know up front so there are no surprises. If this is something you don't want to deal with you'll have to use an original GM emblem. Once installed they look great.
# 1 Bumper Bolt Kit – 1970
The Best Bumper Hardware Kit on the Market for your Buick!
Kit Includes:
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
- Correct Bumper to Frame Mounting Hardware
- Correct Size Stainless Bumper Bolts, Washers & Huts
- Tail Light Lens Mounting Screws
- Front Turn Signal Housings Screws
- License Plate (Fuel Door) Bracket Screws
- License Plate Light Screws
- Correct Side Brace Hardware
- Everything needed to mount bumpers to your car!
- Container Map so you know where every bolt goes!
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
# 1 Bumper Bolt Kit – 1971
The Best Bumper Hardware Kit on the Market for your Buick!
Kit Includes:
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
- Correct Bumper to Frame Mounting Hardware
- Correct Size Stainless Bumper Bolts, Washers & Huts
- Tail Light Lens Mounting Screws
- Front Turn Signal Housings Screws
- License Plate (Fuel Door) Bracket Screws
- License Plate Light Screws
- Correct Side Brace Hardware
- Everything needed to mount bumpers to your car!
- Container Map so you know where every bolt goes!
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
# 1 Bumper Bolt Kit – 1972
The Best Bumper Hardware Kit on the Market for your Buick!
Kit Includes:
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
- Correct Bumper to Frame Mounting Hardware
- Correct Size Stainless Bumper Bolts, Washers & Huts
- Tail Light Lens Mounting Screws
- Front Turn Signal Housings Screws
- License Plate (Fuel Door) Bracket Screws
- License Plate Light Screws
- Correct Side Brace Hardware
- Everything needed to mount bumpers to your car!
- Container Map so you know where every bolt goes!
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models.
Don't see what you need ? Give me a call, we probably have it!
Photo’s below are a sampling of what you can expect in this kit:
Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips
Bumper Bolts – Stainless (24 Pc Kit For 1970)
Stainless Bumper Bolt Kit
Kit Includes:
- 6) 7/16" x 1" Stainless Bumper Bolts for the Front
- 2) 7/16" x 1" Stainless Bumper Bolts for the Rear
- 8) Correct Phosphate Washers
- 8) Correct Phosphate Nuts. (NOT Zinc Hardware store stuff like most vendors)
Bumper Bolts – Stainless (40 Pc Kit for 1971 – 1972)
Stainless Bumper Bolt Kit
- 6) 7/16" x 1" Stainless Bumper Bolts for the Front
- 2) 7/16" x 1 1/4" Stainless Bumper Bolts for the Rear
- 2) 3/8" Stainless Bumper Bolts for the Front Bumper Guard Location & the Sides
- 6) 3/8" Stainless Bumper Bolts for the Rear Bumper Guard Location & the Sides
- Correct Phosphate Washers & Nuts (NOT Zinc Hardware Store stuff like most vendors)
Bumper Brackets – 1970 Rear (Pair)
This is an OEM Part
1970 Skylark, GS & GSX Rear Bumper Brackets. (Concours Level)
These are clean and powder coated and are virtually "Pit Free" - MINT!
Fits 1970 Skylark, GS & GSX or a 1971 - 1972 with a 1970 Rear Bumper
GM Part # 1233130 & 1233130
Note: If you're looking for a Concours Set this is it!
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality"
Bumper Brackets – Aluminum
We are a Dealer for SRE Products which makes an awesome set of Aluminum "Stock Appearing" 1970 Bumper Brackets.
These are super lightweight and recommend for Fiberglass Bumpers.
Not for "Street Use" but we know guys are running them.
Use of these on Factory Steel Bumpers is at "owners risk".
These can be purchased as a full set (Front & Rear) or Front Only or Rear Only.
In an attempt to keep the cost down we generally have these "Drop Shipped" direct from SRE
.
Please Note: Due to the increasing Cost in Aluminum these days we cannot list current pricing.
Please Call to order and check current pricing. . . .
.
.
Front . . .
Rear . . .
Rear . . .
