“King of Torque” Round Window Sticker
4" Round "King of Torque" Window Sticker
$5.00 Add to cart
“King of Torque” Window Sticker
"King of Torque" Window Stickers measure 3.5"  x  10" We can place these in the mail for a cost of a stamp if this is the only item you need to order!   Note:  The Gaber Company “Watermark” will NOT be on the Plate.
$10.00 Add to cart
# 1 Bumper Bolt Kit – 1970
The Best Bumper Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware
  • Correct Size Stainless Bumper Bolts, Washers & Huts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1970 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt.  (Kits come with Hex Bolts automatically)   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:           Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$90.00 Add to cart
# 1 Bumper Bolt Kit – 1971
The Best Bumper Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware
  • Correct Size Stainless Bumper Bolts, Washers & Huts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1971 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt.  (Kits come with Hex Bolts automatically)   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:               Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$105.00 Add to cart
# 1 Bumper Bolt Kit – 1972
The Best Bumper Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware
  • Correct Size Stainless Bumper Bolts, Washers & Huts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1972 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We’re offering both styles. If you’re ordering one of our Bumper Bolt KITs simply mention in the “Notes” section during the check out process if you want the Carriage Bolts in place of the Hex Bolt.  (Kits come with Hex Bolts automatically)   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:                 Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$105.00 Add to cart
# 1 Doors & Rear Windows Hardware Kit
Door & Rear Window Hardware Kit. This kit provides all the hardware needed to assemble your Front & Rear Window assemblies. New Door Latch & Door Handle Screws also included. Door Panels Clips also included! Fits 1970 - 1972 Source - AMK & Stage 1 Restoration     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!     Photos below are a sampling of what you can expect to receive in this kit:   Photos below show a bit more of what you will receive in this kit:  
$110.00 Add to cart
# 1 Exterior Bolt Kit – Coarse Thread Version
Our Exterior Kit includes almost all the fasteners needed to install all the Exterior Parts and Trim. See the Container Map below for details! Be sure to order the correct thread pitch for your vehicle! (Mainly Inner Fenders) Fits 1970 - 1972 Source - AMK & Stage 1 Restoration     Note:  Buick used standard 18 TPI bolts as well as Coarse thread bolts for the Inner Fenders and Core Support. Please check to see what bolts your car requires!!  This Kit is for the Coarse Thread Bolts! We do have a Standard 18 TPI thread bolt kit as well.   The “Coarse Thread” bolt below is what will come in this kit.   Standard 18 TPI  (Threads Per Inch) shown below. We have a kit with these bolts also!     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit!                        
$180.00 Add to cart
# 1 Exterior Bolt Kit – Standard Thread Version
Our Exterior Kit includes almost all the fasteners needed to install all the Exterior Parts and Trim. See the Container Map below for details! Be sure to order the correct thread pitch for your vehicle! (Mainly Inner Fenders) Fits 1970 - 1972  (Standard Thread Version) Source - AMK & Stage 1 Restoration     Note:  Buick used standard 18 TPI bolts as well as Coarse thread bolts for the Inner Fenders and Core Support. Please check to see what bolts your car requires!!  This Kit is for the Standard Thread Bolts! We do have a Coarse thread bolt kit as well.   The “Standard 18 TPI Thread” bolt below is what will come in this kit.   Coarse Thread Bolt shown below. We have a kit with these bolts also!   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit!                      
$180.00 Add to cart
# 1 Front Clip Hardware Kit (Coarse Thread Version)
Our Front Clip Kit gives you all the correct hardware to mount your Fenders, Inner Fenders, Core Support, Hood, Hood Hinges, Battery Tray & Radiator Top Plate. Fits 1970 - 1972  (Coarse Thread) Source - AMK & Stage 1 Restoration   Note:  Buick used standard 18 TPI bolts as well as Coarse thread bolts for the Inner Fenders and Core Support. Please check to see what bolts your car requires!!  This Kit is for the Coarse Thread Bolts! We do have a Standard 18 TPI thread bolt kit as well.       The "Coarse Thread" bolt below is what will come in this kit.   Standard 18 TPI  (Threads Per Inch) shown below. We have a kit with these bolts also!         Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!       Photo’s below are a sampling of what you can expect in this kit:     
$75.00 Add to cart
# 1 Front Clip Hardware Kit (Standard Thread)
Our Front Clip Kit gives you all the correct hardware to mount your Fenders, Inner Fenders, Core Support, Hood, Hood Hinges, Battery Tray & Radiator Top Plate. Fits 1970 - 1972 Source - AMK & Stage 1 Restoration   Note:  Buick used standard 18 TPI bolts as well as Coarse thread bolts for the Inner Fenders and Core Support. Please check to see what bolts your car requires!!  This Kit is for the Standard 18 TPI bolts! We do have a coarse thread bolt kit as well.   The bolt below is what will come in this kit.  Standard 18 TPI  -  (Threads Per Inch)   Most Buick's built in Flint Michigan used the Coarse Thread Bolts shown below. We have a kit with these bolts also!       Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit!       
$75.00 Add to cart
5/16″ Body Panel Replacement Nuts & Bolts
20 Pc Set  - 10 of Each 5/16″ x 3/4″ (L) Standard Thread Body Bolts and Body Panel Replacement Nuts. These are commonly used on Inner Fenders & Core Support. Fits GS, GSX & Skylark Source – AMK     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!
$15.00 Add to cart
Bolt Kit – Convertible Top Bolt Kit
Convertible Bolt Top Kit This Kit includes:
  • Nylon Washers
  • Shoulder Bolts
  • Washer Style Bolts
  • Bushings needed for the Convertible Top Installation
  Fits 1968 - 1972     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$59.00 Add to cart