I have 100’s of Nice OEM Parts that I’ve collected over the years so as time permits I’ll be adding them to this page. Keep an eye on this page as a lot more parts are coming soon! All my parts are nice, clean and in most cases ready to use. All are “Driver Quality” at least! I don’t save the bad stuff. Thanks for looking!

A/C Belt Guard – 455 – OE
This is an OEM Part  Cleaned, Bead Blasted and Painted Fits Buick 350 & 455 Compressors (Belt Guard) I believe these were primarily used on 1972 Models. This may fit other models as well - check your application!     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$25.00 Add to cart
Air Cleaner Decal – GS 350 (NOS)
GS 350 Air Cleaner Decal   (NOS) Fits 1970 - 1972 Source - NOS   Note: We have a handful of NOS GS 350 Air Cleaner Decals left !
$10.00 Add to cart
Air Cleaner Support Bracket (350)
This is an OEM Part  Cleaned and Bead Blasted Fits 1969 - 1972 Skylark, GS & GSX with 350 Engine These are NOT currently reproduced and somewhat hard to find for the 350's.       OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$0.00 Read more
Alternator 55 Amp – 9F24 Date Code
This is an OEM Part  Correct 55 Amp Alternator for Early Build 1970 Stage 1 Cars or A/C equipped Cars  (or both) GM Part # 1100774 Build Date = 9F24 This was rebuilt by our Local Starter & Alternator Shop on 4-16-2021 and posted here on 4-19-2021 It's ready to go!   OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”
$0.00 Read more
Alternator Bolt – OE
This is an OEM Part  This is the Factory Alternator Bolt used by Buick (The long one) Cleaned, Bead Blasted & Painted "Bare Steel" Fits Most Buick V8 Engines without A/C Ready to Install!     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$10.00 Add to cart
Breather Tube Fitting
This is an OEM Part  This is the Fitting that fits in the Valve Covers for your Breather Tube (To Air Cleaner) Cleaned & Bead Blasted Fits Most Buick V8 Engines Ready to Install!     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$25.00 Read more
Bumper Bracket – Rear (RH)
This is an OEM Part  Cleaned, Bead Blasted and Powder Coated but does have some "Shelf Ware" Fits 1970 Skylark, GS & GSX  -   Rear - Passenger Side  -  GM Part # 1233130     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality"  
$25.00 Add to cart
Bumper Brackets – 1970 Front – OE
This is an OEM Part  Cleaned, Bead Blasted and Powder Coated  "Chassis Black" Fits 1970 or 71 / 72 If doing a front end swap. These are really nice Brackets with very little pitting. This is a complete set. 1970 Brackets are the toughest to find because so many people "Clone" the 1970 Models.       OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$0.00 Read more
Cross Shaft Frame Bracket OE
This is an OEM Part  Cleaned, Bead Blasted and Painted This Bracket mounts to the Frame and holds your Back Drive Linkage in place. Fits 1969 - 1972 Skylark, GS & GSX       OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$20.00 Add to cart
Distributor w/ Lectric Limited Kit – OE
This is an OEM Distributor that has been completely cleaned and rebuilt with new parts including the Lectric Limited Electronic Conversion Kit. The Lectric Limited Conversion Kit utilizes all the Factory Wiring so there's no need to add or change any wiring. We've also installed our "Made in America" Distributor Cap which features Brass Contacts. Once installed this kit looks 100% stock so for Concours Restorations this is the way to go. We use this same set up on our Stock Appearing 1970 Stage 1 that runs 11's while remaining "stock appearing" This distributor is currently set up for a 455 but can be utilized on 350 Engines simply be swapping the gear (which we have available)   Here is a break down on the new parts that are included in this Distributor: $169.00     Lectric Limited Electronic Ignition Kit $35.00       Distributor Core  -  This one was build in 1971 (1A25) and is Part Number 1112077 $42.00       Distributor Base Plate $55.00       New 455 Gear $30.00       American Made Cap with Brass Contacts $25.00       Vacuum Advance $17.00       Rotor $13.00       Upper Bushing $10.00       Lighter Weight Springs for added Performance (2 Sets to choose from) $19.00       Rebuild Kit (Lead Wire, Lead Wire Grommet, Felt Washer, Washer Retainer, Proper Shims & Spring Clip) $60.00       Restoration Fee   ($475.00 if Purchased individually)           Note:  If this one is "Out of Stock" I have more! Just give me a call for more info . . . I have other build dates as well.     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$435.00 Read more
Exhaust Manifolds w/Correct Bolts – OE
This is an OEM Part    -   This set has SOLD  -  Check back as we may get more! Cleaned, Sand Blasted and Painted with High Temp Exhaust Paint. Fits 400, 430 & 455 Engines but correct 1971 & 1972 Engines (Per Part Numbers) Also included are the Correct Reproduction Exhaust Manifold Bolts!   Part Numbers: Driver Side = 1233451 Passenger Side = 1238094   Please Note:  These are very nice Manifolds with very little pitting other than the Front 4" on the Passenger side Manifold. Also, there are two broken studs on the outlets that will need to be drilled and re-tapped!  (Priced lower than normal because of that) These have been seen on E-Bay for $300+ and don't look anywhere near as nice as these nor to they include brand new hardware!   OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$0.00 Read more
Fan Blade (4 Blade) – 350 & 455
This is an OEM Part  Cleaned, Bead Blasted and Primed. Fits 1970 - 1972 Skylark, GS & GSX with 350 & 455 Engines without A/C or Heavy Duty Cooling This fan is in nice shape. No Pitting. No Dents. Correct OEM Spacer also included.     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$25.00 Add to cart