“BUICK” Rear Bumper Emblem – 1970
Reproduction "BUICK"  Rear Bumper Emblem - 1970       Note:  We've installed enough of these that we feel the mold for these doesn't allow the Emblem to fit 100% flat on the Bumper as it should. With that being said if you go through with the purchase of this item be aware that you will have to "Draw in the Ends" as it's being tightened. This is a pretty minor issue but we like to let our customers know up front so there are no surprises. If this is something you don't want to deal with you'll have to use an original GM emblem. Once installed they look great. . The Finish on these is decent but not always 100% Perfect. You may need to "touch up" some of the Black in some cases. Just being honest with this part that is made overseas . . . . These are manufactured by one supplier so regardless of where you purchase one this will be the case. We're just up front about it!   .  
$189.00 Add to cart
“BUICK” Rear Bumper Emblem – 1972
"BUICK"  Rear Bumper Emblem - 1972    
$59.00 Add to cart
# 1 Bumper Bolt Kit – 1970 (Carriage Frame Bolts)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Carriage Style)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1970 Buick Front & Rear Bumpers Source – AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Carriage Style Frame Bolts!   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:         Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips  
$95.00 Add to cart
# 1 Bumper Bolt Kit – 1970 (Hex Frame Bolts)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Hex Style)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1970 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Carriage Style Frame Bolts!   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:           Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$95.00 Add to cart
# 1 Bumper Bolt Kit – 1971 (Carriage Style)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Carriage Style)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1971 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Carriage style Bolts.   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:              Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$115.00 Add to cart
# 1 Bumper Bolt Kit – 1971 (Hex Style)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Hex Style)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1971 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Hex style Bolts.   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:               Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$115.00 Add to cart
# 1 Bumper Bolt Kit – 1972 (Carriage Frame Bolts)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Carriage style Bolts)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1972 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Carriage style bolts.   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:                 Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$115.00 Add to cart
# 1 Bumper Bolt Kit – 1972 (Hex Frame Bolts)
The Best Bumper Hardware Kit on the Market for your Buick! Kit Includes:
  • Correct Bumper to Frame Mounting Hardware (Hex style Bolts)
  • Correct Size Stainless Bumper Bolts, Washers & Nuts
  • Tail Light Lens Mounting Screws
  • Front Turn Signal Housings Screws
  • License Plate (Fuel Door) Bracket Screws
  • License Plate Light Screws
  • Correct Side Brace Hardware
  • Everything needed to mount bumpers to your car!
  • Container Map so you know where every bolt goes!
  If you had your Bumpers re-chromed this is the kit you need to dress them out and mount them! Fits 1972 Buick Front & Rear Bumpers Source - AMK & Stage 1 Restoration     Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. This Kit includes the Hex style bolts.   Stage 1 Restoration has the most hardware of any vendor for the 1970 - 1972 GS / GSX & Skylark Models. Don't see what you need ?  Give me a call, we probably have it!     Photo’s below are a sampling of what you can expect in this kit:                 Note: The Tail Light Housing Clips are now reproduced. In most cases you can re-use the originals but if you do need a set of them you can order them here > Tail Light Housing Clips    
$115.00 Add to cart
Bumper Bolts – Stainless (24 Pc Kit For 1970)
Stainless Bumper Bolt Kit Kit Includes:
  • 6)  7/16" x 1" Stainless Bumper Bolts for the Front
  • 2)  7/16" x 1" Stainless Bumper Bolts for the Rear
  • 8) Correct Phosphate Washers
  • 8) Correct Phosphate Nuts.  (NOT Zinc Hardware store stuff like most vendors)
  Fits 1970 Skylark, GS & GSX     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$25.00 Add to cart
Bumper Bolts – Stainless (40 Pc Kit for 1971 – 1972)
Stainless Bumper Bolt Kit
  • 6)  7/16" x 1" Stainless Bumper Bolts for the Front
  • 2)  7/16" x 1 1/4" Stainless Bumper Bolts for the Rear
  • 4)  3/8" Stainless Bumper Bolts for the Front Bumper Guard Location & the Sides
  • 4)  3/8" Stainless Bumper Bolts for the Rear Bumper Guard Location & the Sides
  • Correct Phosphate Washers & Nuts (NOT Zinc Hardware Store stuff like most vendors)
  Fits 1971 & 1972 Skylark, GS & GSX     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$35.00 Add to cart
Bumper Brackets – Aluminum
We are a Dealer for SRE Products which makes an awesome set of Aluminum "Stock Appearing"  1970 Bumper Brackets. These are super lightweight and recommend for Fiberglass Bumpers. Not for "Street Use" but we know guys are running them. Use of these on Factory Steel Bumpers is at "owners risk".   These can be purchased as a full set (Front & Rear) or Front Only or Rear Only. In an attempt to keep the cost down we generally have these "Drop Shipped" direct from SRE . Please Note:  Due to the increasing Cost in Aluminum these days we cannot list current pricing. Please Call to order and check current pricing. . . . . . Front . . .             Rear . . .    
$0.00 Add to cart
Bumper Fillers – 1970 Front
1970 Front Bumper Fillers The are installed at the sides of your bumper   .
$33.00 Add to cart