New Products
Showing 13–24 of 106 results
Brake & Fuel Line Clamp Kit (1971-72)
This Kit includes all the Brake & Fuel Line Clamps as well as the Evaporative System Clamps found on the 1971 & 1972 Cars.
- Correct Clamps
- Correct mounting hardware
- Fits 1971 - 1972
Breather & Bypass Hose Clamps
Correct Breather & Bypass Hose Clamp Kit
Kit includes the following:
- 2) Bypass Hose Clamps
- 2) Breather Hose Clamps
Breather Tube & Clamp Kit
This is the Breather Hose and Correct Clamps that go from the Air Cleaner to the Valve Cover.
Fits 1970 – 1972 455 Engines. (Requires 1970, 71 or 72 Air Cleaner and Valve Covers)
Will not work with 1969 Air Cleaners!
Will not work with 1973 & newer Valve Covers!
If you need the Valve Cover Grommet and Fitting click here
.
Breather Tube Complete Kit
This Kit provides the following:
- Air Cleaner Filter
- Filter Mounting Clip
- Breather Hose & Factory Clamps
- Valve Cover Grommet
- Valve Cover Fitting
Bulb & Fuse Kit
I've put together a Bulb and Fuse Kit that is specific to the 1970 - 1972 Buick Skylark & GS
This kit provides the correct Bulbs and Fuses needed for these cars.
Bussman Fuses and Sylvania Bulbs (Some GE Bulbs also but most are Sylvania)
Fits 1970 - 1972 Skylark & GS
Source - Bussman, Sylvania & GE
You'll find as you try to locate these items that your local Auto Parts store is stocking less and less of this kind of stuff!
Notes: 1 Extra Each (10 - 20 & 25 Amp ) Fuse included as well!
Kits come in a Container similar to our Bolt Kits which also includes a "Container Map" so you know where every item goes.
Also included are copies of Buick's Bulb & Fuse Owners Manual Schematics.
Bulbs are surrounded in Cotton for safe transport. This is the best and only Kit on the market specific to the 1970 - 1972 Buick's!
.
.
[gallery ids="12323,12324,12322,12326,12325,12327,12328"]
.
Bumper Bolts – Stainless (40 Pc Kit for 1971 – 1972)
Stainless Bumper Bolt Kit
- 6) 7/16" x 1" Stainless Bumper Bolts for the Front
- 2) 7/16" x 1 1/4" Stainless Bumper Bolts for the Rear
- 4) 3/8" Stainless Bumper Bolts for the Front Bumper Guard Location & the Sides
- 6) 3/8" Stainless Bumper Bolts for the Rear Bumper Guard Location & the Sides
- Correct Phosphate Washers & Nuts (NOT Zinc Hardware Store stuff like most vendors)
Bumper to Frame Bolt Kit (Carriage Style)
Carriage Style Bumper Bolts - Used to hold the Bumper (Brackets) to the Frame.
24 Pc Kit does Front & Rear!
Also includes the Correct "Conical Toothed" Phosphate Washers & Nuts. (NOT Zinc Hardware store stuff like other vendors)
Fits 1970 – 1972 Skylark, GS & GSX
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they're much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to "seat" in to. We're offering both styles. If you're ordering one of our Bumper Bolt KITs simply mention in the "Notes" section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bumpers (Kit)
Rubber Bumper Set - (11 Pc Set)
I put this kit together with the best & most accurate Rubber Bumpers available.
Fits 1968 – 1972 Skylark, GS & GSX
.
.
Kit Includes:
- 2) Trunk Lid Bumpers
- 4) Hood to Fender Bumpers
- 4) Door Rubber Bumpers
- 1) Rear of Hood "Center" Bumper
Convertible Hardware Kit
1968 - 1972 Convertible Hardware Kit
This Kit contains the following:
- Visor Mounting Screws
- Rear Pinchweld Molding Stainless Trim Mounting Screws
- Rear View Mirror Mounting Screws
- Rear Window Access Panels Screws
- Rear Arm Inner Seal Mounting Screws
- Upper & Lower Arm Rest Panel Mounting Screws
- Pillar Post Pad Mounting Screws
- Header Bow Trim Mounting Screws
- Rain Gutter Mounting Screws
- Latch Receptacle Mounting Screws
Convertible Top Mounting Bolts
Convertible Top Mounting Hardware
These are the Bolts that mount the Convertible Frame (Top) into the Body
Kit includes 6 Bolts as used by GM
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Convertible Weatherstrip Screw Kit
20 Pc Kit – Convertible Weatherstrip Screws
These are the 18 Screws that hold the 6 Side Weatherstrip Pcs in Place.
3 Screws per weather strip - 6 Weatherstrips total. (2 Long ones go in the Front!)
There are also 2 Screws for the Front Header WeatherStrip.
Fits 1968 – 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!