New Products
Showing 61–72 of 118 results
GSX Front Spoiler Mounting Hardware w/ Factory Brace
1970 - 1972 Front Spoiler Hardware Mounting Kit with Center Brace
This Kit has been assembled following Buick's Front Spoiler Mounting Schematic
Kit includes the following per the Factory Schematic:
- 2) Mounting Bolts (Phosphate)
- 2) Mounting Lock Nuts (Phosphate)
- 4) Mounting Washers
- 4) Self Tapping Hex Screws & Washers
- 1) 1/4" Self Tapping Hex Screw (For Center Brace)
- 1) Carriage Bolt, Nut & Lock Washer (For Center Brace)
- 1) Center Brace
GSX Rear Spoiler Mounting Hardware
1970 - 1972 Rear Spoiler Hardware Mounting Kit
Kit includes the following:
- 2 Mounting Studs (Self Tapping on Spoiler Side)
- 2 Gold Cad Mounting Nuts
- 2 Self Tapping Mounting Hex Screws
GSX Rear Spoiler Mounting Kit (Hardware & Brackets)
1970 - 1972 Rear Spoiler Hardware Mounting Kit
Kit includes the following:
- 2 Mounting Studs (Self Tapping on Spoiler Side)
- 2 Gold Cad Mounting Nuts
- 2 Self Tapping Mounting Hex Screws
- 2 Rear Spoiler Mounting Brackets
Harmonic Balancer (455)
Nice Reproduction of the Harmonic Balancer made by T/A Performance.
Used on the Buick 400 / 430 / 455 Engines.
TA2026
GM Part Number 1233832
.
Headlight (Complete) Fastener Kit
44 Pc Kit provides every fastener needed to mount your Headlights and Headlight Bezels
This Kit Provides the following parts:
- 4) Trim Rings
- 4) Headlight Bucket Springs
- 8) Headlight Bezel Nuts
- 8) Headlight Bezel Screws
- 8) Headlight Adjusters
- 12) Headlight Mounting Screws
Sale!
$250.00 $239.00
Add to cart
Headlight (Complete) Mounting Kit w/ T-3 Bulbs
48 Pc Kit provides T-3 Headlights & all the Fasteners needed to mount your Headlights and Headlight Bezels
Fits 1970 – 1972
Source – Stage 1 Restoration (You won't find this kit anywhere else!)
This Kit Provides the following parts:
- 4 Pack of T-3 Headlights (Made in the USA by Lectric Limited)
- 4) Trim Rings
- 4) Headlight Bucket Springs
- 8) Headlight Bezel Nuts
- 8) Headlight Bezel Screws
- 8) Headlight Adjusters
- 12) Headlight Mounting Screws
Headlight Adjustment Screws – 8 Pc Kit
Reproduction Headlight Adjustment Screws that snap into the Core Support.
8 Pack for $24.00 - Black in color
Fits 1970 – 1972
Note: These can be tricky to install. We recommend installation by someone that is familiar with these! See photos below to see how we install them . . .
Photo below shows the Adjuster in place. Notice the Tab (Circled in Yellow) that needs to be installed on the backside of the Sheet Metal.
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Heater Hose Bracket – 1969 – 1970
This is a nice reproduction of the Heater Hose Bracket found on the 1969 & 1970 Models.
Made in the USA (Small run so these won't last long) Properly phosphate coated as well!
Fits 1969 & 1970 - 400 & 455 Engines
Mounting Hardware included. (We've seen these mounted with a Flange Bolt as well as a Regular Hex Head bolt so we include 1 of each!)
Hood Adjustment Bumper Kit
10 Pc Hood Adjustment/Bumper Kit
Kit Includes the following:
- 3) Front Adjustment Bumpers
- 3) Front Adjustment Retainer Nuts
- 2) Rear Adjustment Bumpers
- 2) Rear Adjustment Nuts
- These are the CORRECT from Bumpers!!
Hood Tach Harness Clip
Hood Tach Wire Harness Clip
Clip used to attach the Hood Tach Harness to the Hood
.
Hood Tach Mounting Nuts
Factory Hood Tach Flange Nuts (Phosphate)
These are the correct Phosphate Flange Nuts that Buick used on there Hood Tach's
Fits 1970 - 1972 Factory Hood Tach's
Note: These will not work on the current Aftermarket Hood Tach's.
Hood Tach Repair Harness
Hood Tach Repair Harness
Use this harness to repair or freshen up your GSX Hood Tach Harness.
This is a 36" section of Factory Wiring that you can splice in to repair or freshen up your existing harness.
Also included is a 20" section that is used along with the Ignition Coil Wire. (includes the Factory Weather Proof Junction Plug)
This will also work well for someone using an Aftermarket Hood Tach that wants the correct colored wires.
The 3 wires are Black, Grey and Brown and utilizes the factory connector as used by Buick.
Made by Lectric Limited exclusively for Stage1Restoration! You won't find these anywhere else!