Shop
Showing 361–372 of 1301 results
Center Cap – Single (1971/72)
Nice reproduction of the Center Cap used in 1971 & 72
$45.00 for 1 single cap
Note: These have the correct Silver Background - Not Black which was used in later years!
.
Center Cap Emblem
Center Cap Insert used on 1970 Center Caps
Features the Buick Tri Shield Design
$22.00 Each
.
Center Caps – Set of 4 (1970)
A nice reproduction set of Center Caps featuring the Buick Tri Shield
Correct for 1970 Models
Also includes 4 Locking Bars to lock the caps to your wheels!
Note: The manufacture does NOT provide Screws for the Locking Bars so you will need to come up with those. Typically these are a #10 screw (Self Tapping)
$179.00 for a set of 4
Also sold individually
The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can't pull the center cap off without removing the wheel. That way nobody can steal your caps!
Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get this service with any of the big name vendors!
The photo below shows the Supplied screw size on the left and the size we swap out on the right. These are the 4) screws that hold the retainer to the cap. (Not the Locking Bar Screws)
.
The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can't pull the center cap off without removing the wheel. That way nobody can steal your caps!
Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get this service with any of the big name vendors!
The photo below shows the Supplied screw size on the left and the size we swap out on the right. These are the 4) screws that hold the retainer to the cap. (Not the Locking Bar Screws)
. Center Caps – Set of 4 (1971/72)
Nice reproduction of the Center Caps used in 1971 & 72
$179.00 for a set of 4
Note: These have the correct Silver Background - Not Black which was used in later years!
.
Center Link
Center Link for GM A Body Cars
Fits 1968 - 1972 Skylark, GS & GSXNote: Due to fitment issues we are no longer stocking these.
.
Center Link Washers
Correct Center Link Washers as used by GM
Fits 1964 - 1972
Sold as a Pair - $24
.
Check Valve for Power Brake Booster
Check Valve used on Power Brake Boosters
Correct for 1968 - 1972 GM A Body .
Choke Assembly – 1970 – 455
This is an OEM Part
This is a Super Nice Original Choke Assembly that we sent out and had re-plated.
This is a Factory Choke Assembly that is correct for the 1970 455 Engines with an Automatic Trans
GM Part Number 1232261
.
Note: This will ONLY fit a 1970 455 Intake Manifold due to its bolt pattern!
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
. 
Choke Assembly Bolt
Choke Assembly Mounting Bolt
1970 - Requires 1
1971 - Requires 2
1972 - Requires 3
Be sure to order the correct quantity for your application!
Fits 1970 - 1972
Source - Stage 1 Restoration
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Choke Clip for QJ Carburetors
This is the super tiny clip that holds the choke linkage in place on a Quadrajet Carburetor.
These can be tricky to install and are easily lost because they're so tiny.
Maybe pick up a couple to have on hand!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Cigarette Lighter
Replacement Cigarette Lighter
Correct for 1970 - 1972 Skylark, GS & GSX
Note: I don't carry the current cigarette lighter housings that are on the market because they're made for a Chevelle and do not have a Ground Spade built in to them like the Buick version requires due to being mounted in a Plastic Dash Bezel. THESE MUST BE GROUNDED or they will get to hot and melt your dash or worse yet . . . start a fire. When you can't find a specific item on my website there is usually a reason why!
.
Clip (Fuel Pump to Carb Line Clip)
This is the Clip/Clamp that mounts to one of the Water Pump/Timing Cover bolts and houses the Fuel Line
Fits 1967 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!