Ram Air Hood Parts – Page 3 – StageWonRestoration.com & DieCastMuscleCars.com

Air Cleaner Vent Clip & Filter

This Kit provides the Air Cleaner Filter and Hard to find Clip to mount it. Your hose from the Valve Cover also mounts to this Filter. (Hose sold separately) Fits 1968 - 1972 Buick V8 Engines

$6.00 Add to cart

Air Cleaner Wing Nut (Chrome)

Factory style Air Cleaner Wing Nut in Chrome Fits - All GM Air Cleaners with 1/4" Stud Source - AMK Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$3.00 Add to cart

Air Cleaner Wing Nut (Phosphate)

Factory style Air Cleaner Wing Nut in Phosphate Fits - All GM Air Cleaners with 1/4" Stud Source - AMK Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$2.00 Add to cart

Breather Tube (Air Cleaner to Valve Cover)

This is the Breather Hose that goes from the Air Cleaner to the Valve Cover Fits 1970 - 1972 455 Engines We also have this in "Kit Form" if you need the other pcs used to complete the Breather Assembly .

$19.00 Add to cart

Breather Tube & Clamp Kit

This is the Breather Hose and Clamps that go from the Air Cleaner to the Valve Cover. Fits 1970 – 1972 455 Engines. If you need the Valve Cover Grommet and Fitting click here

$22.00 Add to cart

Breather Tube Complete Kit

This Kit provides the following:

Air Cleaner Filter
Filter Mounting Clip
Breather Hose & Factory Clamps
Valve Cover Grommet
Valve Cover Fitting

Fits 1970 - 1972 Buick V8 Engines found in the Skylark, GS & GSX. Possibly fits many other applications. .

$50.00 Add to cart

GS Hood Decal Inserts (For Fiberglass Hoods)

We used a set of factory hood inserts to duplicate the look and size of the GS Hood Inserts and had them made into a Decal for guys running Fiberglass Hoods. Fits 1970 - 1972 GS & GSX Hoods Source - Stage 1 Restoration

$30.00 Add to cart

Sale!

GS Hood Insert Bezels

Nice Reproduction of the GS/GSX Hood Insert Bezels Fits 1970 - 1972 Please Note: We have Hardware Kits available for these. Factory Bezels (# 8 Screw) Aftermarket Bezels (# 10 Screw) We are also the only vendor that has "New" Hood Seal Plates! 1970 - 71 Seal Plates 1972 Seal Plates .

$145.00 Add to cart

GS Hood Insert Hardware Kit (Aftermarket Bezels)

24 Pc Kit gives you the proper hardware to install your GS/GSX Hood Inserts using the Reproduction Insert BEZELS made by TPP Fits 1970 – 1972 Kit includes 8 of the following . . . .

Seal Plate to Insert Bezel
Insert Bezel to Hood
Insert to Bezel

Note: The Factory Bezels use a # 8 Screw to mount to the Hood. The Reproduction Bezels made by TPP use a # 10 Screw. (which is what this kit includes) Assembly Tip: We grind the very tip off the "Insert Bezel to Hood" screws just to make sure they don't poke through the Bezel! Install the Nuts with caution! Use some assembly lube! Do not force them as the studs can break! They're made out of Pot Metal and will snap off if you force the nuts on. If you need to open up the nut slightly place it in a deep well socket upside down and insert a tapered punch in with a hammer to "spread" the threads a bit! Again, do NOT force them on! Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$10.00 Add to cart

GS Hood Insert Hardware Kit (Factory Bezels)

24 Pc Kit gives you the proper hardware to install your Factory GS/GSX Hood Inserts Fits 1970 - 1972 Kit includes 8 of the following . . . .

Seal Plate to Insert Bezel
Insert Bezel to Hood
Insert to Bezel

Note: The Factory Bezels use a # 8 Screw to mount to the Hood. The Reproduction Bezels made by TPP use a # 10 Screw. Assembly Tip: We grind the very tip off the "Insert Bezel to Hood" screws just to make sure they don't poke through the Bezel! Install the Nuts with caution! Use some assembly lube! Do not force them as the studs can break! They're made out of Pot Metal and will snap off if you force the nuts on. If you need to open up the nut slightly place it in a deep well socket upside down and insert a tapered punch in with a hammer to "spread" the threads a bit! Again, do NOT force them on! Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$10.00 Add to cart

GS Hood Inserts (1970 & 1972)

Reproduction Hood Inserts for GS & GSX Hoods Fits 1970, 1971 & 1972 (Correct for 1972) Note: This set will fit all 3 Years however because of the Triangular Shaped Ram Air assembly found on 1972 Hoods these are correct for 1972 Only. Will Fit on 1970 & 1971 Hoods but not 100% Correct in appearance. Please Read . . . The last batch of these we received had some "issues" with the finish. If you want a set we can still order them in. Call for details & photos. We are NOT the manufacture of these. We carry the same ones you'll get at any other dealer so be aware of this if you purchase these elsewhere! If you purchase a set you are agreeing to the potential paint flaws therefore they are not returnable. Just being up front with this product! These are listed as "back order" but we can order them in within a couple of days. (We no longer stock them due to the paint issues) .

$199.00 Add to cart

Sale!

GS Hood Inserts (1971)

Reproduction GS & GSX Hood Inserts for the 1971 Models Note: The manufacture of these has had an issue with the Mounting Studs breaking during transit. We see this from time to time on our shipments as well (From them to us) Once I receive them I repackage them to avoid the issue however we request they check them prior to shipping to us but we still seem to get some from time to time with a broken stud (usually only on 1 of the 4 corners) We communicated this issue to them but it seems as though the issue isn't being addressed. IF this is something you do not want to deal with please do not order them. As mentioned we request that they inspect them prior to shipping but we STILL seem to end up with some from time to time and it's not an issue they'll cover under "Warranty". These are NOT reproduced by anybody else so these are all we have access to. If you're willing to chance it then you can be assured we'll repack them better than they arrive to us. But if you do not want to deal with the issue then I ask that you do not order them as we don't have a way to warranty the issue at this time. I apologize but just being up front with this part . . . . The Mounting Studs are also pretty short so we recommend using a Push Nut to install them.

$195.00 Add to cart