These Gaskets offer unparalleled sealing and dependability when it comes to your engine.
These gaskets are made from molded Nitrile rubber wrapped around a steel "torque limiting" frame to prevent overtightening.
These fit the 1967 - 1976 Buick Big Block 400 - 430 & 455
Priced Per Pair
Shop
Showing 1237–1248 of 1315 results
Vacuum Hose Kit for GS Air Cleaner
This kit gives you enough Vacuum Hose and Factory Routing instructions to properly route your hoses to your GS Air Cleaner.
1) Tee Fitting & Hose also included for proper hook up to the Vacuum Tree Fitting.
This kit is designed for the 1970 – 1972 350 & 455 Air Cleaners.
Our Vacuum Tubing is consistent with the size Buick used on there 350 & 455 Engines.
Vacuum Modulator
GM Vacuum Modulator
Fits 1964 - 1972 GM Transmissions
Note: These are not 100% original in appearance but do function as the factory ones did.
At this time I'm not aware of anyone reproducing the EXACT factory versions.
.
Vacuum Modulator Line
3/16" Vacuum Modulator Line - OE Steel
Fits 1968 - 1972 GM Turbo 400 Trans
Correct for Buick A Body
.
Vacuum Switch – 3 Port
3 Port Vacuum Switch
Mounts on Intake Manifold
This is similar to the Factory one but slightly different in appearance
If you're building a Concours Car you'll want to locate an Original Switch for judging purposes
This is as close to OE as we have on today's market
If you need a Vacuum Hose kit and Routing Instructions click here > Vacuum Tree Hose Kit
Note: Ports go to the following:
- Top Port - To Vacuum Advance (Distributor)
- Middle Port - To T.C.S. Solenoid (Attached to Carb)
- Bottom Port - To Tee Fitting (Then to Air Cleaner & Carb)
Vacuum Switch Hose Kit w/ Routing Instructions
This kit gives you enough Vacuum Hose and Factory Routing instructions to properly route your hoses for the Thermo Vac Switch as well as the TCS (Solenoid)
Kit Includes the following:
- Vacuum Tee Fitting
- Enough Hose to route as the Factory did
- Routing Instructions and Diagram
Vacuum Tree – OE
This is an OEM Part
Cleaned & Ready to bolt on.
Fits Buick V8 Engines. Not sure how much these vary from year to year or engine to engine?
Note: The Reproductions are $35.00 but are not 100% correct in appearance.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Valve Cover Decal – Stage 1
1969 GS 400 Stage 1 Valve Cover Decal
$9.00 Each
Fits 1969
.
Valve Cover Gaskets – 400 – 430 – 455
These were put into Development by Jason Line along with the Cometic Gasket Company.
These are new to the Market and only available through a few select sources!
Valve Covers (Chrome Stage 1)
Nice reproduction of the 455 Chrome Valve Covers found on the Stage 1 Motors.
These feature the correct Part Numbers also 1232068 & 1232069
Sold as a Pair for $195.00
Fits Buick Big Blocks 400 / 430 / 455
Note: We do stock the Correct Chrome Hardware for these as well.
.
Note # 2: Be aware of the Wrong Hardware on the market for these Valve Covers!
There are some "Metric Headed" bolts on the market. They'll work but the Bolt Heads are Metric!
Also, there are 2) versions of Chrome Valve Covers on the market. These are the CORRECT ones for the 1970 - 1972 GS & GSX!
.
Note # 3: These have been out of stock for quite a while but we have more due 1st week of October!
Vapor Line Clamp Kit
24 Pc Vapor Line Clamp Kit
This kit provides all the correct clamps needed to mount your Vapor Lines
Fits all 1970 - 1972 with the Evaporative System
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Vinyl Top Molding Clip Kit
Set of 10 Reproduction Vinyl Top Molding Clips
Fits 1964 - 1972
Please Note: Most of the 1970 - 1972 Models utilize 18 Clips . . . .
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!