Transmission / Automatic
Showing 13–24 of 69 results

Console Mounting Bracket
This is the Bracket that holds the Middle Portion of your Floor Shift Console to the Shifter Assembly.
Fits 1970 – 1972
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
Bracket shown here in the Red Circle . . . .

Console Mounting Screws
Buick Console Mounting Screws - 10 Pc Kit
Correct for any of the Consoles used on the 1970 - 1972 Buick GS, GSX & Skylark Models.
Quantity Required depends on the type of console you're mounting but our kit provides enough screws for any style used by Buick!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!

Cross Shaft Frame Bracket
Cross Shaft Frame Bracket
Fits 1969 - 1972 Skylark, GS & GSX This is used to install the Back Drive Linkage
Cross Shaft Frame Bracket Kit
Cross Shaft Frame Bracket Kit
Kit includes:
- Cross Shaft Bracket
- Spring
- Insulator
- Washer
- Mounting Bolts

Crossmember (Convertible)
Transmission Crossmember (Convertible)
A very nice reproduction of the Crossmembers for our Buick's This is the Convertible Version Fits 1968 – 1972 Skylark, GS & GSX Note: Due to the size and weight of these we typically have these Drop Shipped from the Manufacture .
Crossmember (Hardtops)
Transmission Crossmember (Hardtop)
A very nice reproduction of the Crossmembers for our Buick's This is the Hardtop Version Fits 1968 - 1972 Skylark, GS & GSX . . Note: Due to the size and weight of these we typically have these Drop Shipped from the Manufacture .
Crossmember Mounting Brackets
Correct Crossmember Mounting Brackets
Sold as a Pair Fits 1968 - 1972 Skylark, GS & GSX If you need the insulators also you can view them here > Crossmember Insulators . .
Crossmember Mounting Insulators
Correct Mounting Cushions to mount your Crossmember
Also called "insulators" - Sold as a Pair! Fits 1968 - 1972 Skylark, GS & GSX If you need the Brackets also you can view them here > Crossmember Brackets .
Floor Shift Cable
Floor Shift Cable
A very nice reproduction of the Shift Cable needed for Automatic Floor Shifters Fits 1970 - 1972 Skylark, GS & GSX . . Note: This cable will work with a T-350 OR a T-400 Transmission. With that being said, you will need to have the CORRECT bracket that mounts to your transmission!! 350 Brackets ARE DIFFERENT than 400 Brackets! . If you need the Factory Clamps that hold the Cable in place you can view them here > Shift Cable Clamp Kit . [gallery ids="13314"] .
Floor Shift Cable Bracket (TH400)
Floor Shift Cable Bracket - Mounts to your Turbo 400 Transmission and holds the shift cable in place.
Fits 1968 - 1972 Skylark, GS & GSX using a Turbo 400 Transmission
Note: If you have a Turbo 350 you will have to locate the factory T-350 bracket as they are different (And NOT reproduced)
You can see what they look like here > https://www.stage1restoration.com/product/floor-shift-cable-bracket-th350/

Floor Shift Cable Retainer Set
Shift Cable Clip Set
This Kit provides all 3 clips needed to install your Shifter Cable
Includes:
- 2) Shift Cable Mounting Clips

- 1) Shift Cable Retaining Clip


Floor Shift Cable Rubber Boot
This is an Aftermarket Rubber Boot (Seal) that works much better than the Factory one to keep out Road Grime and Moisture.
Can be mounted inside OR outside the car.