OEM Parts
Showing 1–12 of 76 results
I have 100’s of Nice OEM Parts that I’ve collected over the years so as time permits I’ll be adding them to this page. Keep an eye on this page as a lot more parts are coming soon! All my parts are nice, clean and in most cases ready to use. All are “Driver Quality” at least! I don’t save the bad stuff. Thanks for looking!
“455” Fender Emblem (NOS)
NOS 455 Fender Emblem
GM Part Number 1243119 (Later superseded to 1394199)
Brand New in the GM Box (Just have 1 of these)
Note: GM Produced 2 different versions of these 455 Fender Emblems
This one measures 1 7/8" from stud to stud. Be sure to measure your mounting holes (unless you're drilling new ones)
.
A/C Compressor Bracket – 1970
This is an OEM Part – GM Part # 1231871
1970 A/C Compressor Bracket – clean!
Fits 1969 & 1970 - 350 / 400 / 455 Engines (Mounts to the Cylinder Head)
This is the Aluminum Version which is correct for 1970
Clean and ready to bolt on.
This is the only one that is correct for the Buick A Body!
Do not confuse this one with the BIG Car brackets which are slightly different!
These are hard to find in this condition!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
A/C Compressor Bracket – 1971-72
This is an OEM Part - GM Part # 1235835
1971 - 1972 A/C Compressor Bracket - clean!
Fits 1971 & 1972 455 Engines (Mounts to the Cylinder Head)
This is the Steel Version which is correct for 1971 & 1972
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
A/C Compressor Bracket (Top)
This is an OEM Part
A/C Compressor Bracket – clean!
Fits 455 Engines (Mounts to the Intake and Compressor)
Note: There are no GM Part Numbers on these Brackets but we believe this came off a 1971 455 so it should be correct for the 71/72 Models.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Air Cleaner Decal – Stage 1 “NOS”
Stage 1 Air Cleaner Decal with Raised Edges
Correct for 1970 – 1972 GS/GSX Air Cleaners
Source – NOS GM
These are some original Stage 1 Decals we purchased through one of our Vendors. These are old but still usable but some "shelf life" may be present. Overall very decent decals for their age! Because these are original they do have the Raised Edges on the Lettering!
Air Cleaner Support Bracket (350)
This is an OEM Part
Fits 1969 - 1972 Skylark, GS & GSX with 350 Engine
These are NOT currently reproduced and somewhat hard to find for the 350's.
Mounting Studs Included!
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Alternator Pulley – 1970 Stage 1 – A/C
This is an OEM Part
Correct for 1970 GS & GSX with 455 Stage 1 Engine and/or A/C
These are NOT currently reproduced and somewhat hard to find.
Mounting Hardware Included!
This has been cleaned and bead blasted.
Customer can paint or re-plate as desired.
GM Part # 1961408
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Ash Tray – OE
This is an OEM Part
1970 - 1972 Skylark, GS & GSX Ash Tray
You'll receive the following items:
- Ash Tray Only This is the last one we have but it does NOT have the mounting bracket as shown in the photo!
THESE HAVE NOW SOLD OUT!
Note: You will more than likely have to Paint this to match your Dash Color. These are original Ash Trays that have not be "restored" Only a couple of these available. These are NOT Reproduced . . . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality” .Back Drive “Column” Rod (OE)
This is an OEM Part
Factory Back Drive Rod
This hooks to your steering column and goes down to the remainder of the Shift Linkage
Only 1 of these available . . . .
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Bucket Seat Spring
Factory Bucket Seat Spring
This is the main spring used on Bucket Seats to aid in moving the seat back and forth
Fits 1968 - 1972 (Maybe more)
4 of these available . . .
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Bumper Brackets – 1970 Front (NICE!)
These have SOLD . . . .
This is an OEM Part
Cleaned, Bead Blasted and Powder Coated "Chassis Black"
Fits 1970 or 71 / 72 If doing a front end swap.
These are really nice Brackets with nearly no pitting. Part Numbers clearly visible. Super Nice Set!
This is a complete set. 1970 Brackets are the toughest to find because so many people "Clone" the 1970 Models.
If you're doing a Concours Build these brackets are NICE!
I will purchase these back if you're not satisfied with them. They're that nice!
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Bumper Brackets – 1970 Rear – Nice!
These have SOLD . . . .
This is an OEM Part
1970 Skylark, GS & GSX Rear Bumper Brackets. (Concours Level)
These are clean and powder coated and are virtually "Pit Free" - MINT!
Fits 1970 Skylark, GS & GSX or a 1971 - 1972 with a 1970 Rear Bumper
GM Part # 1233130 & 1233130
Note: If you're looking for a Concours Set this is it!
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality"