Bolts & Fasteners
Showing 109–120 of 237 results
Brake Hose Mounting Bolt (Rear)
GM Style Bolt with shoulder used to mount the Rear Brake Hose to Rear End Assembly.
.
Note: Depending on the Brake Hose that you're using you may need to drill it out to 3/8" to accommodate the GM bolt with the built in shoulder. If you're still using a Factory Brake Hose you will not need to drill it out as they're already the correct size. We only see this on some of the Reproduction Brake Hoses on the market.
Also Note: 1970 Rear Ends use a Bracket to mount the Brake Hose.
1971/72 Rear Ends the Brake Hose attaches directly to the housing. The same bolt is used in either application.
.
Photo below shows a 1971/72 Brake Hose with Bolt . . .
.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
. 
Brake Pedal Assembly Mounting Hardware
Brake Pedal Assembly Mounting Hardware
Kit Includes:
- 2) Bolts w/Washers to mount Pedal Assembly above Steering Column
- 4) Brake Booster to Firewall Nuts
Breather & Bypass Hose Clamps
Correct Breather & Bypass Hose Clamp Kit
Kit includes the following:
- 2) Bypass Hose Clamps
- 2) Breather Hose Clamps
Bumper Bolts – Stainless (24 Pc Kit For 1970)
Stainless Bumper Bolt Kit
Kit Includes:
- 6) 7/16" x 1" Stainless Bumper Bolts for the Front
- 2) 7/16" x 1" Stainless Bumper Bolts for the Rear
- 8) Correct Phosphate Washers
- 8) Correct Phosphate Nuts. (NOT Zinc Hardware store stuff like most vendors)
Bumper Bolts – Stainless (40 Pc Kit for 1971 – 1972)
Stainless Bumper Bolt Kit
- 6) 7/16" x 1" Stainless Bumper Bolts for the Front
- 2) 7/16" x 1 1/4" Stainless Bumper Bolts for the Rear
- 4) 3/8" Stainless Bumper Bolts for the Front Bumper Guard Location & the Sides
- 6) 3/8" Stainless Bumper Bolts for the Rear Bumper Guard Location & the Sides
- Correct Phosphate Washers & Nuts (NOT Zinc Hardware Store stuff like most vendors)
Bumper to Frame Bolt Kit (Carriage Style)
Carriage Style Bumper Bolts - Used to hold the Bumper (Brackets) to the Frame.
24 Pc Kit does Front & Rear!
Also includes the Correct "Conical Toothed" Phosphate Washers & Nuts. (NOT Zinc Hardware store stuff like other vendors)
Fits 1970 – 1972 Skylark, GS & GSX
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they're much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to "seat" in to. We're offering both styles. If you're ordering one of our Bumper Bolt KITs simply mention in the "Notes" section during the check out process if you want the Carriage Bolts in place of the Hex Bolt. (Kits come with Hex Bolts automatically)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bumper to Frame Bolt Kit (Hex Style)
Hex Style Bumper Bolts - Used to hold the Bumper (Brackets) to the Frame.
32 Pc Kit does Front & Rear!
Also includes the Correct "Conical Toothed" Phosphate Washers & Nuts. (NOT Zinc Hardware store stuff like other vendors)
Fits 1970 – 1972 Skylark, GS & GSX
Note: GM used both Carriage and Hex style Bolts to mount there Bumpers. Buick used both as well. We prefer the Hex Style because they’re much easier to install and tighten/untighten due to the Hex Style design unlike the Carriage style that relies on the hole being square and precise that it has to “seat” in to. We do offer both!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Castle Nut Set Steering
GM Castle Nuts and Cotter Pins for Tie Rods, Ball Joints, Pitman Arm & Idler Arm
Fits 1964 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Choke Assembly Bolt
Choke Assembly Mounting Bolt
1970 - Requires 1
1971 - Requires 2
1972 - Requires 3
Be sure to order the correct quantity for your application!
Fits 1970 - 1972
Source - Stage 1 Restoration
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Clutch Fan Hardware Kit
Correct Hardware to mount your Clutch & Fan to Water Pump (Currently on Back Order)
Kit Includes the following:
- 4) Clutch Fan Mounting Studs
- 4) Clutch Fan Mounting Nuts
- 4) Fan Blade Mounting Bolts
Clutch Fork Clevis Pin
Clutch Fork Clevis Pin
Correct Size Clevis Pin for the 455 Clutch Forks used by Buick
Fits 1970 - 72 Clutch Forks (Factory Version or Our Version)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Console Mounting Screws
Buick Console Mounting Screws - 10 Pc Kit
Correct for any of the Consoles used on the 1970 - 1972 Buick GS, GSX & Skylark Models.
Quantity Required depends on the type of console you're mounting but our kit provides enough screws for any style used by Buick!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!