Bolts & Fasteners
Showing 1–12 of 166 results
I believe we have the Biggest and Best selection of Fasteners in the country for the A-Body Buick’s! Our Bolt Kits can supply about 90% of all the Fasteners needed to restore these cars properly. I don’t have all the individual Fasteners listed yet so if you need something you can’t find feel free to contact me. I will eventually list all of our fasteners as time permits! If it’s listed in our Master Bolt Kits then I have it in stock!
.
4 Speed Linkage “Wave Washers” – 10 Pack
10 Pack of 3/8″ I.D. Wave Washers used on some Manual Trans Linkage Assemblies
Source – AMK
Note: INSIDE Diameter of these is 3/8"
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
4 Speed Linkage Washers – 10 Pack
10 Pack of 1/2" I.D. Thin Washers used on most Manual Trans Linkage Assemblies
Source – AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
5/16″ Body & Frame Bolts – Coarse Thread 5/8″ Length
20 Pc Set of 5/16" x 5/8" (L) Coarse Thread self tapping style Body and Frame Bolts
These are commonly used on Inner Fenders, Core Support and on the frame to retain Brake & Fuel Line Clamps.
Fits GS, GSX & Skylark that required Coarse Thread
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
5/16″ Body & Frame Bolts – Coarse Thread 7/8″ Length
20 Pc Set of 5/16" x 7/8" (L) Coarse Thread self tapping style Body and Frame Bolts
These are commonly used on Inner Fenders, Core Support and on the frame to retain Brake & Fuel Line Clamps.
Fits GS, GSX & Skylark that required Coarse Thread
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
5/16″ Body & Frame Bolts – Standard Thread w/Washer
20 Pc Set of 5/16″ x 3/4″ (L) Standard Thread Body Bolt with Built in Washer.
Fits GS, GSX & Skylark that required Standard Thread w/ a built in washer.
Source – AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
5/16″ Body & Frame Bolts – Std Thread 3/4″ Length
20 Pc Set of 5/16" x 3/4" (L) Standard Thread Body and Frame Bolts.
These are commonly used on Inner Fenders, Core Support and on the frame to retain Brake & Fuel Line Clamps.
Fits GS, GSX & Skylark that required Standard Thread
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
5/16″ Body Panel Replacement Nuts & Bolts
20 Pc Set - 10 of Each
5/16″ x 3/4″ (L) Standard Thread Body Bolts and Body Panel Replacement Nuts.
These are commonly used on Inner Fenders & Core Support.
Fits GS, GSX & Skylark
Source – AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Air Cleaner Mounting Stud
Correct Stud to mount a Factory Buick Air Cleaner to a Factory Quadrajet Carburetor
Source – AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Air Cleaner Support Bracket Studs
These are the Studs & Nuts used on the 455 Air Cleaner Support Brackets.
The studs mount the Water Neck and the Nuts hold the Support Bracket in place.
$5.00 Per Pair
Fits 1969 - 1972 400/455 Engines
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Air Cleaner Wing Nut (Chrome)
Factory style Air Cleaner Wing Nut in Chrome
Fits - All GM Air Cleaners with 1/4" Stud
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Air Cleaner Wing Nut (Phosphate)
Factory style Air Cleaner Wing Nut in Phosphate
Fits - All GM Air Cleaners with 1/4" Stud
Source - AMK
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Arm Rest Base Mounting Screw Kit
6 Pc Arm Rest Base Screw Kit
These measure 1 3/4" and are longer than most on the market.
If you have Chrome Backing Plates behind your Arm Rest Bases these are the screws you want!
Source - AMK