Water Pump Gasket (455)
|
0
455 Water Pump Gasket
$3.00 Each
.
Bolt Kit – Timing Cover, Water Pump, Fuel Pump (455)
|
0
18 Pc Timing Cover, Water Pump & Fuel Pump Bolt Kit
This kit is designed to provide the Factory Style Bolts to mount your Timing Cover, Water Pump & Fuel Pump.
Since nobody reproduces the 4) LONG Timing Cover Bolts that pass through the Water Pump we’re providing 4) Aftermarket Bolts that are the correct length. Your only other option for those 4) LONG Bolts is to use originals (IF you have some)
Kit Includes:
- 5) Timing Cover Bolts
- 4) Aftermarket Timing Cover Bolts (Long)
- 6) Water Pump Bolts
- 1) Alternator Adjustment Bracket Bolt
- 2) Fuel Pump Bolts
Kit Fits 400, 430 & 455 Engines
Photo Below shows the bolts included in this Kit. Water Pump & Timing Cover are not included.
The 4 circled bolts are the Long Bolts that we include as well.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Pulley – Water Pump – 1970 455 (Non A/C)
|
0
This is an OEM Part
Water Pump Pulley – Single Groove
Cleaned, Bead Blasted and Powder Coated.
Correct for 1970 Skylark, GS & GSX with 455 without A/C.
These are also correct for some 400/430 Engines.
This is a very nice pulley. Very little pitting!!
GM Part Number 1375141
Bolt Kit – Water Pump & Alternator Bracket
|
0
7 Pc Water Pump & Alternator Adjustment Bracket Bolt Kit
This Kit Includes:
- 6) Shorter Water Pump Bolts
- 1) Alternator Adjustment Bracket Bolt that ties in to the Water Pump.
Fits 400, 430 & 455
Note: We also offer a Timing Cover, Water Pump & Fuel Pump Bolt kit if you want ALL of the bolts used to mount the Timing Cover and Water Pump.
View that Kit here > Bolt Kit – Timing Cover, Water Pump & Fuel Pump
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – Timing Cover, Water Pump, Fuel Pump (455) – ARP
|
0
18 Pc Timing Cover, Water Pump & Fuel Pump Bolt Kit
This kit is designed to provide the Factory Style Bolts to mount your Timing Cover, Water Pump & Fuel Pump.
Since nobody reproduces the 4) LONG Timing Cover Bolts that pass through the Water Pump we’re providing 4) ARP Bolts that are the correct length and feature a Flange Bolt design as did the originals. Your only other option for those 4) LONG Bolts is to use originals (IF you have some)
Kit Includes:
- 5) Timing Cover Bolts
- 4) ARP Timing Cover Bolts (Long)
- 6) Water Pump Bolts
- 1) Alternator Adjustment Bracket Bolt
- 2) Fuel Pump Bolts
Kit Fits 400, 430 & 455 Engines
Photo Below shows the bolts included in this Kit. Water Pump & Timing Cover are not included.
The 4 circled bolts are the Long ARP Bolts that we include as well.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Water Pump (Long Shaft)
|
0
This is the long shaft 455 Water Pump typically used on 1971 & 72 Models.
.
This Pump is generally used with the following Pulleys: (Some exceptions)
Crank Pulley – GM Number 1235777
Water Pump Pulley – GM Number 1235778
Fits 400, 430 & 455 (Correct for 1971 & 1972 455 engines)
Be sure to check your Pulley Part numbers because in most cases you cannot mix and match these!
As mentioned in the description this is the Long Shaft Pump which will not work with Short Shaft Pulleys!
Water Pump (455 – Short Shaft)
|
0
This is the short shaft 455 Water Pump typically used on 1970 Models as well as 1971/72 without A/C or Stage 1 Option.
.
This Pump is generally used with the following 1970 Pulleys:
Crank – GM Number 1375143
Water Pump – GM Number 1375146
OR if used on 1971/72 Engines then generally used with the following Pulleys:
Crank Pulley – GM Number 1235779
Water Pump Pulley – GM Number 1238156
Fits 400, 430 & 455
Be sure to check your Pulley Part numbers because in most cases you cannot mix and match these!
As mentioned in the description this is the Short Shaft Pump which will not work with Long Shaft Pulleys!
Clip (Fuel Pump to Carb Line Clip)
|
0
This is the Clip/Clamp that mounts to one of the Water Pump/Timing Cover bolts and houses the Fuel Line
Fits 1967 – 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Pulley – Crank – 1970 455 Stage 1 with or without A/C
|
0
This is an OEM Part
Cleaned, Bead Blasted and Powder Coated.
Fits 1970 Skylark, GS & GSX with 455 Stage 1 with or without A/C.
These are also correct for some 400/430 Engines.
GM Part Number 1375143
Typically used with Short Snout Water Pump and Water Pump Pulley 1375146
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Pulley – Crank – 1971/72 455 with A/C and-or Stage 1
|
0
This is an OEM Part
Cleaned, Bead Blasted and Powder Coated.
Fits 1971 & 1972 Skylark, GS & GSX with 455 Engine and A/C or Stage 1 Option.
GM Part Number 1235777
Typically used with Long Snout Water Pump and Water Pump Pulley 1235778
Currently Sold Out
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”