Shop
Showing 769–780 of 1300 results
Heater Hose Clamps – Non A/C
Going by the Chassis Manuals these are the Correct Clamps used on the Heater Hoses and the Bypass Hose on Buick V8 Engines.
This Kit provides:
- 2) Bypass Hose Clamps
- 2) 5/8" Heater Hose Clamps
- 2) 3/4" Heater Hose Clamps
Heater Hose Fitting – OE
This is an OEM Part
Cleaned & polished as shown in photo.
Fits Most Buick V8 Engines
Ready to bolt on!
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
Hold off Valve (1970)
This is the Hold off Valve or Metering Valve used on 1970 Cars with Disc Brakes
Notes: This is meant to be used with 1970 Brake Lines & the correct 1970 Master Cylinder! (As well as the 1970 Distribution Block)
1971 & 1972 Brake systems are different!!!
.
Hood Adjustment Bumper (Front)
Hood Adjustment Bumpers
These are the correct Hood Adjustment Bumpers used on the Front $4.00 Each - 3 Required per car. Fits 1970 - 1972 Skylark, GS & GSX Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!
Hood Adjustment Bumper (Rear)
Hood Adjustment Bumpers for the Rear
$16.00 Each – 2 Required - If you need 2 be sure to order two! Fits 1970 – 1972 Skylark, GS & GSX Note: To be "Concours Correct" you would want to send these off to be Gold Cad.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
. 
Hood Adjustment Bumper Kit
10 Pc Hood Adjustment/Bumper Kit
Kit Includes the following:
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key words . . . Hood Bumpers, Hood Adjusters
.
- 3) Front Adjustment Bumpers
- 3) Front Adjustment Retainer Nuts
- 2) Rear Adjustment Bumpers
- 2) Rear Adjustment Nuts
- These are the CORRECT from Bumpers!!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key words . . . Hood Bumpers, Hood Adjusters
. 
Hood Adjustment Bumper Kit (Front)
6 Pc Hood Adjustment Bumper Kit
These are the Correct Hood Adjustment Bumpers and Nut Retainers found on our Buick's
Fits 1970 - 1972 (Front of Hood)
Kit includes:
Note: Once you have your hood height set you can use a 3/4" wrench to tighten (clockwise) the Adjuster as shown in the photo!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key Words . . . Hood Bumpers, Hood Adjusters
- 3) Front Adjustment Bumpers
- 3) Retainer Nuts
Note: Once you have your hood height set you can use a 3/4" wrench to tighten (clockwise) the Adjuster as shown in the photo!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key Words . . . Hood Bumpers, Hood Adjusters 
Hood Adjustment Retainer Nuts
Front Hood Bumper Retainer Nuts - 3 Pack
These are the correct retainer nuts found in the core support to house the Hood Bumpers
Fits 1970 - 1972 (Each car uses 3 of these)
Nice Reproduction Made in the USA!
Helpful Hint: Once you have these adjusted they're meant to be locked down. You can use a 3/4" Open Ended wrench to twist the top half to the "Lock Position" (Clockwise)
Note: I have the Correct Hood Bumpers also. Click the Link for details.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Helpful Hint: Once you have these adjusted they're meant to be locked down. You can use a 3/4" Open Ended wrench to twist the top half to the "Lock Position" (Clockwise)
Note: I have the Correct Hood Bumpers also. Click the Link for details.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Hood Emblem (Skylark)
Buick Tri Shield Hood Emblem
These are typically found on the 1972 Skylark Hoods .
Hood Hinge Springs
1970 - 1972 Hood Hinge Springs
These are designed for the Factory Steel Hoods (Not Fiberglass) The Manufacture states that these will also work on 1969 Models. The price is for a matched pair .
Hood Hinges
1970 - 1972 Hood Hinges (New!)
Replace your Bent or Loose Factory Hinges These come in a "Black" EDP coating for protection. They should be Phosphate Plated if you want them to pass "Concours" judging . These fit the 1970, 71 & 72 Skylark, GS, GSX & Sportwagons. . Need the correct hood hinge spings? Click Here . Need the correct mounting bolts? Click Here . .
Hood Insulation (GS & GSX)
GS & GSX Under Hood Insulation
3 Piece Kit - Pre Cut Fits 1968 - 1972 GS & GSX Note: Skylark Models use 5 Pcs so if you have a Skylark hood you'll want this kit > Skylark Hood Insulation This item was not being made correctly for our Buick's so we have a new vendor that IS making it correct. If you purchase this elsewhere you're probably not getting the correct stuff!- Correct Shape
- Correct Color
- Correct Center Hole (Buick exclusive)