Clips, Clamps & Brackets

Showing 73–84 of 139 results

Heater Hose Bracket – 1969 – 1970
This is a nice reproduction of the Heater Hose Bracket found on the 1969 & 1970 Models. Made in the USA   (Small run so these won't last long)  Properly phosphate coated as well! Fits 1969 & 1970  -  400 & 455 Engines Mounting Hardware included. (We've seen these mounted with a Flange Bolt as well as a Regular Hex Head bolt so we include 1 of each!)    
$69.00 Add to cart
Heater Hose Bracket – 1971/72
This is an OEM Part  Factory Heater Hose Bracket Cleaned and Bead Blasted Fits 1971 – 1972 Skylark, GS & GSX with 455 Engine These are NOT reproduced and somewhat hard to find. . . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”         OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”
$0.00 Read more
Heater Hose Clamps – For A/C Cars
Going by the Chassis Manuals these are the Correct Clamps used on the Heater Hoses, Bypass Hose & Control Valve on Buick V8 Engines with A/C This Kit provides:
  • 2)  Bypass Hose Clamps
  • 2)  5/8" Heater Hose Clamps
  • 2)  3/4" Heater Hose Clamps
  • 2)  5/8" Tower Clamps for the Control Valve used on A/C Cars
Fits 1970 - 1972 Buick V8 Engines with A/C  -  (Correct for other Years also)     Note: The Tower clamps are made by Wittek which is who Buick sourced back in the day however we feel these clamps aren't quite the quality they use to be. For better results lubricate the entire clamp prior to installation. This helps the clamp tighten down properly. The lubrication eliminates some of the resistance during the tightening process. Make sure the bolt stays straight during the tightening process as well.       Photo below was taken from a 1970 Buick Chassis Manual.  (1971 & 1972 Correspond as well) [gallery ids="12981"]   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$16.00 Add to cart
Heater Hose Clamps – Non A/C
Going by the Chassis Manuals these are the Correct Clamps used on the Heater Hoses and the Bypass Hose on Buick V8 Engines. This Kit provides:
  • 2)  Bypass Hose Clamps
  • 2)  5/8" Heater Hose Clamps
  • 2)  3/4" Heater Hose Clamps
Fits 1970 - 1972 Buick V8 Engines without A/C  -  (Correct for other Years also)       Photo below was taken from a 1970 Buick Chassis Manual.  (1971 & 1972 Correspond as well) [gallery ids="12980"]   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!        
$11.00 Add to cart
Hood Adjustment Retainer Nuts
Front Hood Bumper Retainer Nuts - 3 Pack These are the correct retainer nuts found in the core support to house the Hood Bumpers Fits 1970 - 1972  (Each car uses 3 of these) Nice Reproduction Made in the USA!     Helpful Hint: Once you have these adjusted they're meant to be locked down. You can use a 3/4" Open Ended wrench to twist the top half to the "Lock Position" (Clockwise)     Note:  I have the Correct Hood Bumpers also. Click the Link for details.   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!      
$10.00 Add to cart
Hood Release Handle Retaining Clip
Hood Release Handle Retaining Clip Fits 1970 – 1972     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$2.00 Add to cart
Hood Release Rod Retaining Clips
Hood Release Rod Retaining Clips  (Pair) Fits 1968 - 1972  -  See photo below     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!      
$3.00 Add to cart
Hood Tach Harness Clip
Hood Tach Wire Harness Clip Clip used to attach the Hood Tach Harness to the Hood     .
$10.00 Add to cart
Hose Clamp (OE)
Factory GM Hose Clamp I believe this is a Power Brake Hose Clamp but not exactly sure where it was used. This was removed from a 1972 Buick Riviera GS Factory Original GM Piece   OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”     .
$5.00 Add to cart
Kick Panel Cable Clip
Kick Panel Cable Clip $2.00 Each Fits 1968 - 1972     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$2.00 Add to cart
Kick Panel Cable Clips
Kick Panel Cable Clips  ( Set of 4 ) Fits 1968 – 1972     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$7.00 Add to cart
Kickdown Switch Bracket
If you have a Turbo 400 Trans this is the Bracket used to hold the Kickdown Switch in place Fits 1968 - 1972 Skylark, GS & GSX . Please Note: If you're converting to a TH400 car from a TH350 car please keep in mind the Gas Pedal Arm is different. The TH350 version has an extra "arm" on it for the Kickdown Cable. That may interfere with the TH400 Kickdown Mechanism.  (Shown in Photo below) . . Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! . . Photo below shows the TH350 Gas Pedal with the additional arm for the kickdown cable. A TH400 Gas Pedal assembly does not have the additional arm since the kickdown is controlled by an electronic switch.   [gallery ids="12926"] .
$20.00 Add to cart