Bolts & Fasteners – Page 14 – StageWonRestoration.com & DieCastMuscleCars.com

GSX Front Spoiler & Baffle Hardware kit (Complete)

1970 - 1972 Front Spoiler & Baffle Hardware Mounting Kit This Kit has been assembled following Buick’s Front Spoiler Mounting Schematic Kit includes the following per the Factory Schematic:

6) Mounting Bolts (Phosphate)
6) Mounting Lock Nuts (Phosphate)
12) Mounting Washers (Phosphate)
3) Self Tapping Hex Screws & Washers
1) 1/4" Self Tapping Hex Screw (For Center Brace)
1) Carriage Bolt, Nut & Lock Washer (For Center Brace)
6) Baffle Mounting Clips (Phosphate)

This is all that is needed to mount a Front Spoiler and Baffle. This is by far the best kit on the market in terms of accuracy! For more Factory Diagrams be sure to check out our Factory Diagrams Page [gallery ids="14242,14243"] Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$39.00 Add to cart

GSX Front Spoiler & Baffle Installation Schematic

Here is the Factory Front Spoiler and Baffle Installation Schematic . . . .Click on Image for a larger photo. Note: This is included when you purchase a Spoiler or Baffle Hardware Kit. This is not something you'll typically receive from any of our Competitors! Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$0.00 Add to cart

GSX Front Spoiler Baffle Hardware Kit

1970 - 1972 Front Spoiler Baffle Hardware Mounting Kit This Kit has been assembled following Buick’s Front Spoiler Mounting Schematic Kit includes the following per the Factory Schematic:

6 Mounting Clips (Phosphate)
4 Mounting Bolts (Phosphate)
4 Mounting Lock Nuts (Phosphate)
8 Mounting Washers (Phosphate)

For more Factory Diagrams be sure to check out our Factory Diagrams Page [gallery ids="14242,14243"] Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$20.00 Add to cart

GSX Front Spoiler Hardware Mounting Kit

1970 - 1972 Front Spoiler Hardware Mounting Kit This Kit has been assembled following Buick's Front Spoiler Mounting Schematic Kit includes the following per the Factory Schematic:

2) Mounting Bolts (Phosphate)
2) Mounting Lock Nuts (Phosphate)
4) Mounting Washers
3) Self Tapping Hex Screws & Washers
1) 1/4" Self Tapping Hex Screw (For Center Brace)
1) Carriage Bolt, Nut & Lock Washer (For Center Brace)

This is all that is needed to mount a Front Spoiler. If you're also using a Baffle you will need the Baffle Hardware Kit! This is by far the best kit on the market in terms of accuracy! For more Factory Diagrams be sure to check out our Factory Diagrams Page [gallery ids="14242,14243"] Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$20.00 Add to cart

GSX Front Spoiler Mounting Hardware w/ Factory Brace

1970 - 1972 Front Spoiler Hardware Mounting Kit with Center Brace This Kit has been assembled following Buick's Front Spoiler Mounting Schematic Kit includes the following per the Factory Schematic:

2) Mounting Bolts (Phosphate)
2) Mounting Lock Nuts (Phosphate)
4) Mounting Washers
4) Self Tapping Hex Screws & Washers
1) 1/4" Self Tapping Hex Screw (For Center Brace)
1) Carriage Bolt, Nut & Lock Washer (For Center Brace)
1) Center Brace

This is by far the best kit on the market in terms of accuracy! For more Factory Diagrams be sure to check out our Factory Diagrams Page [gallery ids="14242,14243"] Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$49.00 Add to cart

GSX Rear Spoiler Mounting Hardware

1970 - 1972 Rear Spoiler Hardware Mounting Kit Kit includes the following:

2 Mounting Studs (Self Tapping on Spoiler Side)
2 Gold Cad Mounting Nuts
2 Self Tapping Mounting Hex Screws

This is by far the best kit on the market in terms of accuracy! Note: Both the Nuts and the Hex Screws require a 7/16" Socket Note: This kit is designed to mount a Factory or Reproduction Spoiler that has not had it's mounting holes altered! (Or enlarged) Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$20.00 Add to cart

GSX Rear Spoiler Mounting Kit (Hardware & Brackets)

1970 - 1972 Rear Spoiler Hardware Mounting Kit Kit includes the following:

2 Mounting Studs (Self Tapping on Spoiler Side)
2 Gold Cad Mounting Nuts
2 Self Tapping Mounting Hex Screws
2 Rear Spoiler Mounting Brackets

This is by far the best kit on the market in terms of accuracy! Note: Both the Nuts and the Hex Screws require a 7/16" Socket Note: This kit is designed to mount a Factory or Reproduction Spoiler that has not had it's mounting holes altered! (Or enlarged) The Brackets slide up through the Factory Holes on a GSX Deck Lid. If you do not have a GSX Deck Lid then you'll need to add the holes. (I do not have any measurements other than what you see in the photos) The Brackets are approximately 1.5" wide. Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it! [gallery ids="13561,13563"]

$50.00 Add to cart

Harmonic Balancer Mounting Bolt

Harmonic Balancer Replacement Mounting Bolt Fits 400, 430 & 455 Engines Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it! .

$6.00 Add to cart

Harmonic Balancer Washer

Harmonic Balancer Mounting Washer

GM # 1199944 Fits 400, 430 & 455 Engines Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$4.00 Add to cart

Headlight (Complete) Fastener Kit

Headlight Mounting Kit

44 Pc Kit provides every fastener needed to mount your Headlights and Headlight Bezels This Kit Provides the following parts:

4) Trim Rings
12) Headlight Mounting Screws
8) Headlight Adjusters
4) Headlight Bucket Springs
8) Headlight Bezel Nuts
8) Headlight Bezel Screws

Fits 1970 - 1972 Skylark, GS & GSX

These are currently on Back Order

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$96.00 Read more

Sale!

Headlight (Complete) Mounting Kit w/ T-3 Bulbs

Headlight Mounting Kit with T3 Bulbs

48 Pc Kit provides T3 Headlights & all the Fasteners needed to mount your Headlights and Headlight Bezels Fits 1970 – 1972 Skylark, GS & GSX Source – Stage 1 Restoration (You won't find this kit anywhere else!)

These are currently on Back Order

This Kit Provides the following parts:

4 Pack of T3 Headlights (Made in the USA)
4) Headlight Trim Rings
8) Headlight Adjusters
4) Headlight Bucket Springs
8) Headlight Bezel Nuts
8) Headlight Bezel Screws
12) Headlight Mounting Screws

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

Headlight Adjustment Screws – 4 Pc Kit

Headlight Adjustment Screws

These snap into the Core Support and hold the headlight Buckets in place. Sold in Packs of 4 for $12 or Packs of 8 for $24 This is the 4 Pack and Black in color (half of what is needed for 1 car) We offer this kit for the guy that only needs a couple extra's rather than having to purchase all 8 Fits 1970 - 1972 Skylark, GS & GSX

These are currently on Back Order

Note: These can be tricky to install. We recommend installation by someone that is familiar with these! See photos below to see how we install them . . . Photo below shows the Adjuster in place. Notice the Tab (Circled in Yellow) that needs to be installed on the backside of the Sheet Metal.

We use a 3/8" (Deep well) socket to install the adjusters . . .

Tap them in place "gingerly"

Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$12.00 Read more