Hood Adjustment Bumper Kit
20 Oct 2021

Hood Adjustment Bumper Kit

by | | 0

10 Pc Hood Adjustment/Bumper Kit

Kit Includes the following:

  • 3) Front Adjustment Bumpers
  • 3) Front Adjustment Retainer Nuts
  • 2) Rear Adjustment Bumpers
  • 2) Rear Adjustment Nuts
  • These are the CORRECT from Bumpers!!

Fits 1970 – 1972

 

Note: Once you have your hood height set you can use a 3/4″ wrench to tighten (clockwise) the Adjuster as shown in the photo!

 

 

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.

Don’t see what you need ?  Give me a call, we probably have it!

 

 

Key words . . .  Hood Bumpers, Hood Adjusters

.

Hood Adjustment Bumper (Rear)
10 Nov 2020

Hood Adjustment Bumper (Rear)

by | | 0

These are the correct Hood Adjustment Bumpers for the Rear

$15.00 Each  –  2 Required

Fits 1970 – 1972

 

Note: To be “Concours Correct” you would want to send these off to be Gold Cad.

 

 

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.

Don’t see what you need ?  Give me a call, we probably have it!

 

.

Hood Adjustment Bumper Kit (Front)
20 Apr 2020

Hood Adjustment Bumper Kit (Front)

by | | 0

6 Pc Hood Adjustment Bumper Kit

These are the Correct Hood Adjustment Bumpers and Nut Retainers found on our Buick’s

Fits 1970 – 1972 (Front of Hood)

 

 

Kit includes:

  • 3) Front Adjustment Bumpers
  • 3) Retainer Nuts

 

 

 

 

Note: Once you have your hood height set you can use a 3/4″ wrench to tighten (clockwise) the Adjuster as shown in the photo!

 

 

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.

Don’t see what you need ?  Give me a call, we probably have it!

 

 

Key Words . . . Hood Bumpers, Hood Adjusters

Bumpers (Hood to Fender)
15 Apr 2020

Bumpers (Hood to Fender)

by | | 0

Set of 4 Hood to Fender Bumpers

Fits 1969 – 1972

(These are the only ones that are the correct Length)

 

Please Note: In some cases in may be necessary to trim off a small portion of the “Entry” Side of the Bumper. (The side that actually enters the fender)

This is simply done with a Razor Blade – just make the entry portion the same width as the Slot in the Fender.

 

.

Hood Adjustment Bumper (Front)
13 Apr 2020

Hood Adjustment Bumper (Front)

by | | 0

These are the correct Hood Adjustment Bumpers used on the Front

$4.00 Each  –  3 Required per car.

Fits 1970 – 1972

 

 

 

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.

Don’t see what you need ?  Give me a call, we probably have it!

 

Bumpers (Kit)
31 Jan 2021

Bumpers (Kit)

by | | 0

Rubber Bumper Set

I put this kit together with the best & most accurate Rubber Bumpers I have.

Fits 1968 – 1972

.

.

Kit Includes:

  • 2)  Trunk Lid Bumpers
  • 4)  Hood to Fender Bumpers
  • 4)  Door Bumpers
  • 1)  Rear of Hood Bumper

 

.

Hood Adjustment Retainer Nuts
5 Apr 2020

Hood Adjustment Retainer Nuts

by | | 0

Front Hood Bumper Retainer Nuts – 3 Pack

These are the correct retainer nuts found in the core support to house the Hood Bumpers

Fits 1970 – 1972  (Each car uses 3 of these)

Nice Reproduction Made in the USA!

 

 

Helpful Hint: Once you have these adjusted they’re meant to be locked down. You can use a 3/4″ Open Ended wrench to twist the top half to the “Lock Position” (Clockwise)

 

 

Note:  I have the Correct Hood Bumpers also. Click the Link for details.

 

Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.

Don’t see what you need ?  Give me a call, we probably have it!

 

 

 

1972 Buick GS Stage 1
26 May 2020

1972 Buick GS Stage 1

by | | 0

This project is a Buick Skylark that will receive a 455 engine as well as some Modern Suspension from Speedtech. This is a rust free car with only 49,000 original miles.It is being set up for the Street as well … Continued

1970 Buick GS Stage 1
23 May 2020

1970 Buick GS Stage 1

by | | 0

One of our completed projects is a 1970 Buick GS Stage 1 that will be built for the street as well as the strip. Motor Trend Magazine tested these cars back in 1970 and back then they ran a 13.38 … Continued