OEM Parts
Showing 25–36 of 61 results
Headlight Switch Ground Spade
Headlight Switch Ground Spade
This is an OEM Part These are NOT reproduced. Fits 1970 - 1972 Skylark, GS & GSX Headlight Switches . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . Note: Because Buick used a Plastic Dash Bezel it is required to Ground the Headlight Switch! Photo below shows the Factory Grounds for the Headlight Switch and the Wiper Switch. These should be in use for each switch to work properly.
Each one shown here installed correctly
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Heat Stove – 350
This is an OEM Part
Fits 1970 – 1972 Skylark, GS & GSX with 350 Engine. (maybe other years as well)
These are NOT reproduced and somewhat hard to find.
It’s been cleaned, bead blasted and painted with High Temp Primer
.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Heat Stove – 455
This is an OEM Part
Fits 1970 – 1972 Skylark, GS & GSX with 455 Engine
These are NOT reproduced and somewhat hard to find in nice condition.
Very little Pitting on this one!
It's been cleaned, bead blasted and painted.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Heater Hose Bracket – 1971/72
This is an OEM Part
Factory Heater Hose Bracket
Cleaned and Bead Blasted
Fits 1971 – 1972 Skylark, GS & GSX with 455 Engine
These are NOT reproduced and somewhat hard to find.
.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality” 
Heater Hose Fitting – OE
This is an OEM Part
Cleaned & polished as shown in photo.
Fits Most Buick V8 Engines
Ready to bolt on!
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
Hood Latch Assembly – Replated
Beautifully Re-Plated Hood Latch assembly for Consours Restorations
Fits 1970 - 1972 Skylark, GS & GSX
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
. 
Hood Latch Pull Rod (1970)
This is an OEM Part
Factory Hood Latch Pull Rod
Fits 1970 Skylark, GS & GSX
.
Note: These are different between the 1970 Cars vs. the 1971/72 Cars.
This one is roughly 8 1/4" in length.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Hood Latch Pull Rod (1971/72)
This is an OEM Part
Factory Hood Latch Pull Rod
Fits 1971 – 1972 Skylark, GS & GSX
Clean!
Note: These are different between the 1970 Cars vs. the 1971/72 Cars.
This one is roughly 7" in length.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Hood Release Handle Mechanism
This is an OEM Part
Hood Release Mechanism
Cleaned, Bead Blasted & re-done in Phosphate
Fits 1971 & 72 Skylark, GS & GSX
Correct Mounting Bolts included
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Hose Clamp (OE)
Factory GM Hose Clamp
I believe this is a Power Brake Hose Clamp but not exactly sure where it was used.
This was removed from a 1972 Buick Riviera GS
Factory Original GM Piece
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
Ignition Coil Bracket – OE
This is an OEM Part
Cleaned, Bead Blasted and Painted
Fits most Buick V8 Engines or the era
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
OE Starter Bolt
Original GM Starter Bolt
This is the LONG one.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
.