Interior
Showing 85–96 of 138 results
Headrest Lower Cover – White
GM Bucket Seat Headrest Lower Cover - Correct Pebble Grain Texture
Nice Reproduction used by GM on there Bucket Seats from 1969 - 1972
$16.00 Each
.
Horn Cap Emblem
Buick Horn Cap Emblem for the 3 Spoke Rallye Steering Wheel
Fits 1970 - 1972 Buick Horn Caps (Does Fit other years as well)
This is a nice reproduction!
Note: Be sure to line up the notch at the bottom of the emblem with the tab in the Horn Cap Housing. This will "clock" the emblem properly which is important for proper alignment of the Cap to the Retainer it snaps in to. The Red Circles need to match once the Cap is Snapped into place. This will allow the Horn Cap to fit properly and function properly!
Key Chains – GS – 1967 – 1972
Leather "GS" Key Chains from the Matt Dennison Collection
Choose the Year you want!
$9.00 Each
Key Chains – GSX – 1970 – 1971 – 1972
GSX Key Chain
Choose the Year you want!
$9.00 Each
Kick Panel Cable Clip
Kick Panel Cable Clip
$2.00 Each
Fits 1968 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Cable Clips
Kick Panel Cable Clips ( Set of 4 )
Fits 1968 – 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Hex Style
10 Pc Set of the Hex Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Phillips Style
10 Pc Set of the Phillips Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Wafer Style
10 Pc Set of the Wafer Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
We have also encountered this style screw as well.
Correct for 1970 – 1972 GM A-Body Cars – (And I’m sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panels for cars with A/C
Kick Panels for A/C Cars
Fits 1968 – 1972
Available in Black Only – Can be painted other colors if needed.
Kick Panels for NON A/C Cars
Kick Panels for NON A/C Cars ( 2 Vent Handles per side)
Fits 1968 - 1972
Available in Black Only - Can be painted other colors if needed.
Note: We've seen some of these come through where the Cables need to be switched . . . Top on Bottom - Bottom on Top (For some reason the manufacture gets this mixed up) Easy Fix but . . . .
Kickdown Switch Bracket
If you have a Turbo 400 Trans this is the Bracket used to hold the Kickdown Switch in place
Fits 1968 - 1972 Skylark, GS & GSX
.
Please Note: If you're converting to a TH400 car from a TH350 car please keep in mind the Gas Pedal Arm is different. The TH350 version has an extra "arm" on it for the Kickdown Cable. That may interfere with the TH400 Kickdown Mechanism. (Shown in Photo below)
.
.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
.
Photo below shows the TH350 Gas Pedal with the additional arm for the kickdown cable.
A TH400 Gas Pedal assembly does not have the additional arm since the kickdown is controlled by an electronic switch.
.
.