Heating & Cooling

Showing 37–48 of 70 results

Heater Hose Bracket – 1971/72
This is an OEM Part  Factory Heater Hose Bracket Cleaned and Bead Blasted Fits 1971 – 1972 Skylark, GS & GSX with 455 Engine These are NOT currently reproduced and somewhat hard to find.       OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”
$0.00 Read more
Heater Hose Clamp (3/4″)
Correct 3/4" heater hose clamp generally used at the heater core $1.50 Each  
$1.50 Add to cart
Heater Hose Clamp (5/8″)
Correct 5/8" heater hose clamp generally used at the Heater Core $1.50 Each    
$1.50 Add to cart
Heater Hose Clamps – For A/C Cars
Going by the Chassis Manuals these are the Correct Clamps used on the Heater Hoses, Bypass Hose & Control Valve on Buick V8 Engines with A/C This Kit provides:
  • 2)  Bypass Hose Clamps
  • 2)  5/8" Heater Hose Clamps
  • 2)  3/4" Heater Hose Clamps
  • 2)  5/8" Tower Clamps for the Control Valve used on A/C Cars
Fits 1970 - 1972 Buick V8 Engines with A/C  -  (Correct for other Years also)     Note: The Tower clamps are made by Wittek which is who Buick sourced back in the day however we feel these clamps aren't quite the quality they use to be. For better results lubricate the entire clamp prior to installation. This helps the clamp tighten down properly. The lubrication eliminates some of the resistance during the tightening process. Make sure the bolt stays straight during the tightening process as well.       Photo below was taken from a 1970 Buick Chassis Manual.  (1971 & 1972 Correspond as well)   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$15.00 Add to cart
Heater Hose Clamps – Non A/C
Going by the Chassis Manuals these are the Correct Clamps used on the Heater Hoses and the Bypass Hose on Buick V8 Engines. This Kit provides:
  • 2)  Bypass Hose Clamps
  • 2)  5/8" Heater Hose Clamps
  • 2)  3/4" Heater Hose Clamps
Fits 1970 - 1972 Buick V8 Engines without A/C  -  (Correct for other Years also)       Photo below was taken from a 1970 Buick Chassis Manual.  (1971 & 1972 Correspond as well)   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!        
$10.00 Add to cart
Heater Hose Fitting – OE
This is an OEM Part  Cleaned & polished as shown in photo. Fits Most Buick V8 Engines Ready to bolt on!     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$20.00 Add to cart
Lower Radiator Hose Spring
Lower Radiator Hose Inner Support Spring This helps keep the hose from "collapsing" Fits most GM Radiator Hoses  
$15.00 Add to cart
Overflow Hose
Overflow Hose - Goes from the Radiator to the over flow tank.  (Bottom port) Length is 3 1/2 Feet so plenty long enough.  (Cut to length)    
$4.00 Add to cart
Overflow Hose Kit
Over Flow Hose Kit Kit provides both hoses and correct clamps as seen in our photo Fits 1970 - 1972 Skylark, GS & GSX   Note: Overflow Tank Sold Separately    
$20.00 Add to cart
Sale!
Overflow Recovery Tank – Black Lid
Reproduction of the Overflow Tank using the Black Lid Fits 1970 - 1972   Installation Tip: Prior to shipping these are inspected to make sure the Nipples are not broke. (2 total) One on top and one on the bottom. We then bubble wrap them so they do not break during shipping. They are fragile so use caution when installing your hoses. Do not "Force" them! If you're using the wrong size hose and force them the nipples can break and that is not a "warranty" situation. So take your time and install the hoses carefully!   .
$145.00 Add to cart
Overflow Recovery Tank – Clear Lid
Reproduction of the Overflow Tank using the Clear Lid Fits 1970 – 1972 but mostly seen on early 1970 Models!     These are due in soon!  
$0.00 Read more
Sale!
Overflow Recovery Tank & Hose Kit
Reproduction Overflow Tank & Hose Kit Kit contains the correct Ribbed Hoses as well as the Recovery Tank. Fits 1970 - 1972 Skylark, GS & GSX . Installation Tip: Prior to shipping these are inspected to make sure the Nipples are not broke. (2 total) One on top and one on the bottom. We then bubble wrap them so they do not break during shipping. They are fragile so use caution when installing your hoses. Do not "Force" them! If you're using the wrong size hose and force them the nipples can break and that is not a "warranty" situation. So take your time and install the hoses carefully! . .
$165.00 Add to cart