Axle Vent Tube (3/8″)
3/8" Diameter Axle Vent Fits 1964 - 1972 GM Rear Ends     Note:  We typically see this size on the 8.2 Buick Rears
$5.00 Add to cart
Axle Vent Tube (7/16″)
7/16" Diameter Axle Vent Fits 1964 - 1972 GM Rear Ends     Note: We typically see this size on the 8.5 Buick Rears  (1971/1972)   .
$17.00 Add to cart
Backing Plate Bolts – Rear
16 Pc Set of Rear Backing Plate T-Bolts and Locking Nuts Fits 1964 - 1972 GS, GSX & Skylark with Rear Drum Brakes     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$22.00 Add to cart
Ball Stud (Frame Side)
Correct Ball Stud mounted on the Frame for 4 Speed Cars Fits 1964 - 1972 GM A Body   Note: We have the Mounting Bracket for this as well   ,
$10.00 Add to cart
Ball Stud Frame Bracket
Correct Frame Bracket for mounting the Ball Stud for 4 Speed Cars Fits 1968 - 72 Skylark, GS & GSX with Manual Trans   .
$14.00 Add to cart
Bearing Kit for Disc Brake Cars
Correct Bearings & Seals for Disc Brake Cars Kit Includes:
  • Seals
  • Inner Bearings
  • Outer Bearings
  Fits 1967 - 1972   .
$34.00 Add to cart
Body Bolt Mounting Nut
Correct GM Body Bolt Mounting Nut $2.00 Each . . Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$2.00 Add to cart
Bolt Kit – Fuel Tank
This Kit provides the Hardware needed to install your Fuel Tank. Fits 1968 - 1972 GM A Body     Note:  We have 2 Fuel Tank Bolt Kits. This one is a bit cheaper but not 100% correct because the smaller bolts are threaded all the way up the shank which is not correct.   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!   .
$9.00 Add to cart
Bolt Kit – Fuel Tank – Concours Correct
This Kit provides the Hardware needed to install your Fuel Tank. Fits 1968 - 1972 GM A Body     Note:  We have 2 Fuel Tank Bolt Kits. This one is a bit more Money but it is 100% correct. We also have a cheaper version but the smaller bolts are threaded all the way up the shank which is not correct.   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
.
$17.00 Add to cart
Center Cap – Single (1970)
A nice reproduction Center Cap featuring the Buick Tri Shield Correct for 1970 Models Also includes Locking Bar to lock the cap to your wheel! $45.00 for 1 single cap   Note: These are currently on Back Order   The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can't pull the center cap off without removing the wheel. That way nobody can steal your caps!   Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get these items with any of the big name vendors! The photo below shows the Supplied screw size on the left and the size we swap out on the right.   .
$45.00 Add to cart
Center Cap – Single (1971/72)
Nice reproduction of the Center Cap used in 1971 & 72 $45.00 for 1 single cap   .
$45.00 Add to cart
Center Cap Emblem
Center Cap Insert used on 1970 Center Caps Features the Buick Tri Shield Design $22.00 Each   .
$22.00 Add to cart