Front Rotor Wheel Studs
Front Rotor Wheel Studs 7/16”-20  x  1-17/32” Front Disc Brake Wheel Studs. Correct for 1968 - 1972 GM A-Body   .
$10.00 Add to cart
Fuel Line Pinch Clamps – 1/4″ Hose Spring Clip – Red
Correct Hose Spring Clips for 1/4″ Fuel Line This is a 10 Pack for $9.00     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$9.00 Add to cart
Fuel Line Pinch Clamps – 3/8″ Hose Spring Clip – Green
Correct Hose Spring Clips for 3/8" Fuel Line This is a 10 Pack for $9.00     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$9.00 Add to cart
Fuel Line Pinch Clamps – 5/16″ Hose Spring Clip – Yellow
Correct Hose Spring Clips for 5/16″ Fuel Line This is a 10 Pack for $9.00     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$9.00 Add to cart
Fuse Box Mounting Screws
The Correct Fuse Box Mounting Screws with built in sealer This is a Pair for $10.00       Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$10.00 Add to cart
Glove Box Liner & Door Hardware
Glove Box Liner & Door Hardware Kit Kit Includes:
  • 3) Glove Box Door Screws (There are 5 spots but Buick only utilized 3)
  • 6) Glove Box Liner Screws
  • 5) Glove Box Door & Liner Spring Nuts
  Fits - 1970 - 1972 Skylark, GS & GSX   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$10.00 Add to cart
Grill Mounting Nuts
Grill Mounting Nuts as used by GM (Phosphate - Flange) 6 Pc Kit Works on all 1970 - 1972 GS, GSX & Skylark Grills     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$10.00 Add to cart
Grill Mounting Nuts & Trim Hardware (1970)
Grill Mounting Hardware Kit  -  14 Pc Kit Kit Includes:
  • 6) Phosphate Flange Nuts
  • 4) Chrome Valance Screws
  • 4) Stainless Side Trim Screws
  Works on all 1970 GS & GSX Grills     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$15.00 Add to cart
GS Hood Insert Hardware Kit (Aftermarket Bezels)
24 Pc Kit gives you the proper hardware to install your GS/GSX Hood Inserts using the Reproduction Insert BEZELS made by TPP Fits 1970 – 1972   Kit includes 8 of the following . . . .
  • Seal Plate to Insert Bezel 
  • Insert Bezel to Hood 
  • Insert to Bezel
  Note: The Factory Bezels use a # 8 Screw to mount to the Hood. The Reproduction Bezels made by TPP use a # 10 Screw. (which is what this kit includes)   Assembly Tip: We grind the very tip off the "Insert Bezel to Hood" screws just to make sure they don't poke through the Bezel! Install the Nuts with caution! Use some assembly lube! Do not force them as the studs can break! They're made out of Pot Metal and will snap off if you force the nuts on. If you need to open up the nut slightly place it in a deep well socket upside down and insert a tapered punch in with a hammer to "spread" the threads a bit! Again, do NOT force them on!     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$10.00 Add to cart
GS Hood Insert Hardware Kit (Factory Bezels)
24 Pc Kit gives you the proper hardware to install your Factory GS/GSX Hood Inserts Fits 1970 - 1972   Kit includes 8 of the following . . . .
  • Seal Plate to Insert Bezel 
  • Insert Bezel to Hood 
  • Insert to Bezel
  Note: The Factory Bezels use a # 8 Screw to mount to the Hood. The Reproduction Bezels made by TPP use a # 10 Screw.   Assembly Tip: We grind the very tip off the "Insert Bezel to Hood" screws just to make sure they don't poke through the Bezel! Install the Nuts with caution! Use some assembly lube! Do not force them as the studs can break! They're made out of Pot Metal and will snap off if you force the nuts on. If you need to open up the nut slightly place it in a deep well socket upside down and insert a tapered punch in with a hammer to "spread" the threads a bit! Again, do NOT force them on!     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$10.00 Add to cart
GSX Front Spoiler & Baffle Hardware kit (Complete)
1970 - 1972 Front Spoiler & Baffle Hardware Mounting Kit This Kit has been assembled following Buick’s Front Spoiler Mounting Schematic Kit includes the following per the Factory Schematic:
  •  6) Mounting Bolts (Phosphate)
  •  6) Mounting Lock Nuts (Phosphate)
  •  12) Mounting Washers (Phosphate)
  •  3) Self Tapping Hex Screws & Washers
  •  1) 1/4" Self Tapping Hex Screw (For Center Brace)
  •  1) Carriage Bolt, Nut &  Lock Washer (For Center Brace)
  •  6) Baffle Mounting Clips (Phosphate)
  This is all that is needed to mount a Front Spoiler and Baffle. This is by far the best kit on the market in terms of accuracy!     For Larger Photos of this and many other Factory Diagrams be sure to check out our Factory Diagrams Page     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$39.00 Add to cart
GSX Front Spoiler & Baffle Installation Schematic
Here is the Factory Front Spoiler and Baffle Installation Schematic . . . .Click on Image for a larger photo.   Note: This is included when you purchase a Spoiler or Baffle Hardware Kit. This is not something you'll typically receive from any of our Competitors!     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$0.00 Add to cart